• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1.

    Stray Marks in Print

    Check the humidity level, under 20% humidity can cause a static charge that will cause overspray or random nozzle strays. Consider introducing a humidifier in the environment.

  3. internal error 0000007: - anyone know what it means?

    Try restarting the machine & carry out the Limit Initialization

  4. Graphtec FC7000 FC8000 Series Service Menu

    Thanks for sharing, but what exactly was the issue and what you did yo correct it? It may help other as well... :thankyou:

  5. Cart change out question VJ 1304

    ProWraps Thanks for clarifying.

  6. roland sp300 service call 107

    Carry out Linear Encoder Setup

  7. Banding only on left side of ProIII XC540

    What about the heaters. Is one side of the printer less hot then the other side?

  8. Cart change out question VJ 1304

    Wayne Great Question, I always had the impression not to let them run out because it will cause another issue(s):cross contaminate. I know the 1204 & 1304 are not equipped sub-tanks, that's my concern. It would be a good question for RandyA
  9.

    Stray Marks in Print

    Missing Nozzles? Soak the head... Clean, clean and double clean...

  10. valuejet 1204 cleaning issue

    Check for dried ink around the head, cap and wiper. Be sure the seal it is in good shape Soak the capping station with cleaning solvent, let it sit for 30 minutes. Do a strong cleaning with head in low and see if that helps...

  11. Need desperate help! PF correct on one side and not the other??

    What about the heaters, it could be possible that one side is less hot then the other because I have seen the adhesive on the back side of the heater wear our and the heater start to come off the platen. Is one side of the printer less hot then the other side?

  12. Mutoh PrismJet Extra Falcon Outdoor Jr - Not printing magenta or yellow

    Congrats!! If it dumps the inks again you know what to do!

  13. Which Graphtec to buy?

    I will get a FC8000-60 (24")

  14. Mutoh PrismJet Extra Falcon Outdoor Jr - Not printing magenta or yellow

    Yes you can, pretty easy stuff: http://www.signwarehouse.com/support/index.php?_m=knowledgebase&_a=viewarticle&kbarticleid=349&nav=0,16 You can buy the part from them, very friendly people from Texas.

  15. Mutoh PrismJet Extra Falcon Outdoor Jr - Not printing magenta or yellow

    Me thinks you answer you own question. I suspect your M & Y Ink are on the floor. lol Are the pads in the cap assy swollen and touching the bottom of the print head? It's probably the sponges in the caps have swollen and made contact with the heads, hence your ink on the floor. I will start...

  16. Mutoh PROBLEM??????

    Hey Cory, Any updates on this issue?

  17. VJ 1204 stops printing midway thru

    It won't fit on a DC, it needs to go into a DVD. If SAi gave you a link to download Flexi all you need to do it is download the file, unzip it and run the autorun.exe PS.- Their Download does not have any ICC profiles . I will request a full DVD

  18. VJ 1204 stops printing midway thru

    Are you trying to burn it into a DVD ?
  19.

    Falcon Outdoor Problem

    The red goes on top

  20. Mutoh PROBLEM??????

    Perhaps the clean mode was set to strong, hence it used all your inks....

  21. Mutoh PROBLEM??????

    Did you leave the printer off or on ? IS there any ink left on the cartridges?
Top