Search results

Over the last couple of years I've noticed that there is still several ml still left in the cartridge after the print says its time to change...So over the past several months I've had an idea to open up the empty cartridge and pour he remaining in a storage jar. Well, I had a jar of magenta...

What could be causing this type of dropout? Before everybody gets on here and says change print head, I would like to try every option I can before I drop a grand on a print head....As far as background info...the machine is 10 years old and I've never replaced a damper or print head. I have...

Does anybody use Bordeaux Inks? My Versacamm is out of warranty and I was looking to use some cheaper ink? I've used Solaris for awhile and haven't had a single issue, but I have seen that Bordeaux Fuze is even cheaper and was wondering if anybody has tried it? I would like to buy in bulk (1...

Versacamm recently came up with a message to replace sponge...So I replaced both the long sponge and spit sponge. The problem is it still keeps telling me before every pint to replace sponge....Ugh.....Any ideas why it is not resetting?

Is it possible to add another pinch roller or 2 to the roland sp 300v?? Instead of 2 you would have 3 or 4....that way if for paper or material got off a little it still wouldn't mess your print up?? Some times when im printing something 8-15 feet long and I get to the end of the roll of he...

what would cause my roland sp 300v to band just on the far end of the vinyl....Its only about 4 inches of banding on the farther side of the print...it clears itself up after that 4 inches???..so 25 looks great, but the other 4 inches is banding? Any ideas?

Hey I have a 30 inch roland versacamm....Its reading the 29 max cutting area. but when it prints it prints with in a 1/16 from the edge of the vinyl??? If I print crop marks...its completely off the vinyl? whats wrong?

I've downloaded the trial, but every time I try to install it loads for a few minutes then pops up an empty white box....and just locks up...if I tell it to close it will say cancel CorelDraw setup...if I click no...it just simply goes back to being locked up with an empty white box in the...

Where is everybody buying the supplies for the Colorpainter W-64s and w-54s model. Specifically the gx and neon inks?

Does anybody make Flourescent Ink yet for Roland?...Do alot of racecars and i'm tired of overlaying flo. on all my wraps?

Please help I gotta roland sp 5400v....and the problem is i've been printing a banner...it gets 96% done and stops and the printer says now processing....but it will never start back and complete the print?...its happened to me 3 times today...even after i shut of the printer...rebooted pc and...

What is a used sc-500 worth? Do they use eco-sol max inks? A guy around town has got one for sell, but i don't know what they are worth? He's asking 9k for it? Is it a good printer?

I've been having a pinch roller error sometimes... both left and right even though they are in the right locations...I've done a search trying to find the problem, but i was wanting to ask you guys...A couple months ago I flipped the encoder strip over because it was struggling finding crop...

I gotta a roland sp300v...I have noticed some banding in my cyan, but its weird? It bands from the middle to the end of a pass...the start of the pass to the middle is fine?? What could cause this? I'm using oracal 3640G media and profile? By the way ...this just started about a month ago? If I...

Is there a way to recovery(clean) a dx4 print head? Internally? I've seen the print head doctor machine on youtube, but that thing is 2 thousand dollars? There has got to be a way to flush out the clogs that doesn't cost 2k? Anybody done it? Print Heads are so expensive I'm suprised this hasn't...

Do you think there will ever be a printer that will print flouresent colors? I know that Roland has a new printer that has metalic ink...and it fires off of a spot color? Isn't possible they could do the same thing, put instead of metalic it would be a flouresent color? Instead of metalicc gold...

I f you were going to buy a new printer to do vehicle wraps...What would you buy? Under 35 Grand?

Any body have a hard time saving to an AI (x3 or X5)...It seems like it always locks up every time??? I work in corel and he works in AI and I can't seem to send them to him? I can't really send as a eps either, because it has so many fills in the graphic....it would be a huge eps file??? Any ideas?

I got a sp 300v and I'm having some cutting issues (after printing crop marks and laminating). The graphics are only 2ft long so it's not that the printer and the cutting is really spread out? Its off bad on the scan the length of the vinyl tall (i think that's scan???) I did a print cut...

I use a couple of fills in my wraps, and I use the texture tool to add them to my graphic.? Question is is it possible to add a texture fill like carbon fiber or engine turn to the palette. That way it would speed up the process? I know you can do it in flexi, but i really don't like that...