Search results

It is possible that this machine was modified and will not run Mutoh firmware properly. I dont show any firmware for Agfa here. Gino's right, see if it runs with the original Agfa firmware. If it runs with the Agfa firmware and not the Mutoh firmware, perhaps they have modified the...

Fred, it was by no means meant to diminish what you've done or are doing. This is an incredible site and I am personally amazed at all you do. The ONLY point I make is that even the God-less are capable of compassion and caring. Sorry, if it appeared awkward or out of place.

Tommy, Most likely your capping station/head is not sealing that well. Make sure they are clean, you should clean them 1-2 times a week. The printer counts ink droplets and pump cycles to estimate how much ink is left in the carts. If the cap doesnt seal, it wont pump ink, but still count...

Actually Arlo, I understand that this whole initiative was put forward by our resident atheist, Colin. Good luck and best wishes.

42

Multi-Strike and Wait will allow you to put multiple passes of ink on media. 2 Strikes and typically 2.5secs wait is a good place to start. Clean and grease your bearing raceways...

The Preference Manager should be under - Start -(Flexi folder).

The capping station is where the head rests. And yes, if no ink is pulling through, then typically either the drain is plugged, the pump is bad or the seal is bad. The capping station is a consumable, recommended replacement is about every 18 months. That can often be extended by keeping it...

You may also want to back everything up and reset Preferences in Flexi to default. This will wipe out all your profiles and files, so you will need to reload them after you reset. Preferences can sometimes get corrupted.

1. Make sure you have ink in the cartridge. The easiest way is to take the top cover off. Run a cleaning and see if the ink is pumping through the line. You can check the waste line into the waste bottle, there should be a small amount of ink flowing. If not, perhaps your capping station...

In the back where the media first feeds through. Should be about 1/2 to 3/4" oval shape. I dont remember if there are one or two on that machine. If one, it should be in the center. If two, one center one near the capping station end.

Take a piece of the media and rotate it 90 or 180. If it goes with the media then it is media. You may want to clean a piece of media in that location with denatured alcohol. You may want to clean the rollers on your machine, if you find it to be that roll.

Or get your local dealer in there and do a bit of training to get you up to speed. There is a bit of learning curve to outdoor printing, but not something a day or two of training couldnt help.

Should be on or two oval shaped cutouts in the back near the rollers.

Mutoh builds the Epson GS6000 for them and Epson licenses the wave technology from Mutoh.

You need to at least make part of the profile in Flexi. Your initial ink limits and ink restrictions. You can also make the icc in Flexi or import it from some other program AFTER you do the ink limits and ink restrictions.

If you were in the User Menu on the Printer, then there is really not much you could have done to really mess up the Printer. That could have been done in maintenance mode. Perhaps you've moved the head height to high? Make sure in Flexi you have color correction checked. You may also...

Just netflixxed this: http://www.imdb.com/title/tt1587707/ Shows how one guy markets bad art into a fortune.

Depending on what you changed, there may be no 'reset'. If you have reset the RAM, you wipe out all your settings, head ranks, alignements, etc., you then would have to start from scratch, unless you have a parameter file backed up somewhere. Exactly what where you changing? What does the...

Banding in dark colors only is almost always the profile. (providing the nozzle check is good) Too much ink too fast for the media. Running uni cuts the speed in half, which should help. Higher heat should help as well. It is all about evaporating all that solvent in a timely and controlled...