• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Mutoh refurb

    There is a small microswitch under the bottle. Make sure that it is connected properly and that the bottle makes the switch.

  3. Powerful Cleaning Falcon Jr.

    http://www.mutoh.com/webmap/locationmap.html

  4. E068Err CR Encoder Anyone know what this means?

    Abnormal condition in head travel distance (Yaxis) during printer operation. Displayed if there is no feedback from encoder. Cable (incorrectly installed or damaged) CR board Encoder or encoder strip Undue resistance of the carriage

  5. Power Board for Mutoh Falcon Outdoor?

    Your Mutoh Dealer: http://www.mutoh.com/webmap/locationmap.html

  6. Banding in RED only?

    First change it to UNI directional from Bi.

  7. Banding in RED only?

    Yes, really. Dot gain banding from too much ink too fast with not enough heat for that color. You can try raising the heat Or slowing the printer down (another mode/resolution/more passes)

  8. Banding in RED only?

    Almost always a profile.

  9. Avery Super Cast

    No, seems to print just as easy as the old.

  10. mutoh falocon ll out door- 64 ?

    You should be able to turn 'media detect' to off. Utility/MediaDetection/

  11. mutoh falcon ll outdoor error message

    Are you loading all this media in exactly the same spot?

  12. mutoh falcon ll outdoor cleaning maintnance ?

    With Eco-Ultra ink, recommended manual cleaning is 2x week, so at least 1x week. You should clean 1. the stainless steel rim around each head, and the surrounding area (never the nozzle plate on the bottom of the head) 2. each cap (put a few ml of cleaning solution down each cap and the...
  13.

    Falcon Jr ICC settings

    You need a 7.5 profile. Check to see what extension your profiles are in, then search for profiles with that extension. If I remember correctly those were .cft. Seems to me that was about the time Eco-Ultra came out and replaced Eco-Plus... You will want the Ultra profile. Your...
  14.

    Falcon Jr ICC settings

    8.1 profiles you may want to look at: ftp://ftp.mutoh.com/DiamondShield/SA%20Falcon%20Outdoor%20Jr.%20Ultra%20Ink/
  15.

    Falcon Jr ICC settings

    You actually dont want an ICC, I think that is a CFT maybe a PTF (though I think this was 7.6 or even 8.1). This will have all the proper info, ink limits, linearizations, and ICC. SAI ICC's are for 8.5 and above.
  16.

    Falcon Jr ICC settings

    Which RIP? version?

  17. Setup Profiles for Mutoh + Banding issues

    http://www.mutoh.com/kb/ First item "Most Viewed"

  18. Help! Recharging rockhopper 38

    wet the cap with some cleaning solution and try again.
  19.

    Falcon JR Test Print can somebody tell me what the problem is

    It is the timing adjustment for the black head, forget what it is called, but it tells the printer when to start printing black. It is basically the alignment.

  20. Mutoh Falcon Outdoor 46 - y encoder error

    What exactly did you use to clean the strip?

  21. Missing Colors on Nozzle Check

    If there is not a tight seal, you cannot pull a proper vacuum and pull ink properly. This could indicate a dirty stainless rim around the bottom of the head or a dirty or damaged cap. Do a head soak for an hour THEN clean the cap and the seal area on the head. If this does not give you a...
Top