Search results

Similar to Safety-Kleen?

We bought this same plotter 18 years ago and it still cuts great. After 10years of hard use we bought a second one (T750 SL) as a spare and soon had both running side by side. Both great cutters... the former is serial/parallel and the SL version added USB connection. I cannot imagine how much...

Techman- sorry- I figured in the Flexi forum it was obvious but I guess when I check the new posts that I don't look to see what forum they are in either. Frank W- it actually works perfectly on Win 7 32bit. Player- does that have to be a powered hub? I tried with a new Win7pro 64bit and...

I am using W7 32bit which works fine but I cannot get the PM setup to give me the option to select USB as the port to connect like WXP has. I have loaded all the USB drivers I can find- old and new. Summa cutter control sees it and will do a test cut OK. Seems like many years ago... when I had...

Which is?

Best idea ever. I also find that annoyed employees are very productive.

Gesso looks real nice if you brush in appropriate strokes. Gene

We had an old **** come in years ago for boat reg numbers and insisted that they have to be MN1234FU on one side and UF4321NM on the other. Finally made them that way and he went away... always wondered what the first DNR officer who saw him thought?

We have taken them out for years... if the trailer is newish it will go well, if it is old and rusty it is a pain-in-the-arse. Gene

Not sure what this is... a new model? Price is very good (12K) and I know a lot of peeps love latex and I have been meaning to look at them. Gene

Also good to know that they will fail... and if they do and you don't have a replacement you can remove it and turn the downside to the upside (requires punching a new hole usually) and it will function again.

Thank you all. Gene

The spec sheet calls out one 500GB 3.5 Inch SATA drive and one 500GB 3.5 Inch SATA 6Gb/s with 16MB DataBurst Cache. In the actual puter they are both Toshiba DT01ACA050 drives- I am wondering what the '16MB DataBurst Cache' means? If it is significantly better I will see if they will send me...

I alway buy from Dell Outlet and have had good luck. I needed one more Win7pro to replace the computers that go on the internet and thought... hell I need a better puter for myself... so I bought a 4th gen i7 9020 Optiplex with a lot of extra stuff on it. I have a half dozen Win7pros with i3...

Keepass... open source as well. Gene

We use a 1/2" steel bar- slide it along the cut edge and it curls the bur under and give a nice finished edge. Gene

Call Summa support... they are the best. Doesn't matter if you are the orig owner or whatever- they will help you. Gene

A two foot or so 1x2 with a screw in the end to catch the grommet will give you a less stretchy way to hold down (clamp the other end to the edge of the table of course). That said... we have over a hundred premade banner blanks upstairs that have not been touched in 5 years. We will be moving...

And we probably have more to lose than the flea market guy?

I am moving a copy of Omega 2.5 to a different, slightly more modern Win XP puter. I have put this off for years but can no longer stand it as is. I installed a serial/parallel card and have the Edge working but I can't get the enVision to connect. I called Gerber Tech and they are recommending...