Search results

Actually that is not really correct. You can use generic heads with firmware 4.4 and higher if you know a trick but (and its a big one), all of the current generic heads on the market nowadays a 2nd and 3rd generation locked which can sometimes be used if you also get a decoder board that you...

Sounds like the mainboard got fried.... Pro tip, whenever you are going to disconnect any internal cables like the ribbon cables to the head, unplug the power from the machine and wait 15 minutes. This makes sure any residual voltage in the capacitors has dissipated. Not doing so can fry the...

No such thing as a "Denali" as a vehicle. Well technically GMC did have a one off concept truck in the mid 2000's that was called the Denali but it was never actually made. Denali is just a high line trim package available on GMC vehicles. A GMC denali could literally be a Sierra, Acadia, Yukon...

I think the majority of these machines all use Tygon tubing.....

I would say to go to a local sign shop and talk to them about what you need.

Just do NOT do it this way..... :D

Yep - critical to wait at minimum 5 minutes, 15 is even safer after fully unplugging the power cord before ever disconnecting the head cables or really any other cables. The capacitors can hold a tiny bit of electrical charge for a bit and that can immediately fry some of the electronics...

1) Signburst 2) Dell Precision Workstations 3) HP Z Workstations The key difference between these and typical "consumer" computers are - true business class machines with pro grade workstation hardware that are engineered and purpose build for bullet proof compatibility and 24x7 reliability -...

Dang..... we could use another design license. If you realize you might have one let me know! Happy New Year!

Not sure about the Mutoh smart card chips but I know on most other brand the standard chips cannot be reset. Once the printer writes empty to the chip its done. Permanently. Aside from the smart card instead of a chip I believe the Mutoh cartridges are essentially identical to the ones used by...

Wish you had posted these a month ago..... I'd have bought two. Bought two other machines though. Awesome price on these - best of luck and Happy New Year!

That is what it amounts to. They are pretty vigilant about protecting their patterns (reasonably so). Like some other proprietary popular designs they might also not even be interested in licensing anyone else to produce it. I've run into that before on other patterns in the past....

I know on building codes here you (even if you are fully competent to do so properly) are not allowed to work on anything yourself. You must pay someone to do it for you. If you go by the rules you are not even allowed to change out a basic light switch, install a new faucet on your sink, etc...

I doubt they will be doing any wraps with it. The UV inks are really not intended for that and are not really flexible enough to take much in the way of stretching..... Saw it demo'd firsthand at the SGIA show in New Orleans and they did have a print from it on a hood to show that it can work...

Hope everyone had a Merry Christmas! They are here so.... new price - $2500 plus freight or local pickup is also fine. For figuring freight, that is up to the buyer, dimensions and weight are below and pickup would be at our commercial shop in West Columbia, SC, zip code 29169. We have a...

I do know that the power supply boards on these have capacitors that eventually will start to fail and when the capacitors fail it can cause all sorts of issues ranging from print quality issues to motor errors and more due to the poor and unstable voltage. The fan on the power supply board's...

Same as what I have..... I have 1.8 through 6.0. Not sure I've ever run across anything prior to 1.8 before.

Another vote for Clean Cut..... I found them right here in another post a few years ago.

With the USB chip cooked you have no way to back up the parameters from your existing board. As long as the machine will still boot with the existing board you are okay though but it will be, as you noted early on, a manual process. You will have to boot it with the service mode enabled and then...

For years we stayed static on staff with 3 to 4 people and averaged 10 to 20 percent. This year however we landed a good size contract which literally doubled our revenue for 2016 but that is an exception. I am planning on expanding equipment in the next couple of years though to add a flatbed...