Search results

i have a print broker customer who has a sign install job in Baltimore. i don't have specs or info as of yet but if anyone is interested let me know thanks

installed a large window graphic and had some issues on the glass. size 57" x 80" oracal 610 cut vinyl yellow color. install went fine but it was installed on the inside of the window and when viewed from the outside you can see a lot of the squeegee strokes so doesn't look so great. there was a...

making a hanging sign for a customer. hanging with straight arm sign bracket. the sign it self will be aluminum composite. just wondering if anyone puts an edge cap or some sort of molding on a sign like this? if so is it just for cosmetic purposes? also what do you use? thanks

have a customer looking to have custom grille 3D printed for his car. anyone have a source for 3D printing?

roland LEJ-640 uv hybrid flatbed printer. supposed to be able to print up to 1/2" thick material. we have had the machine for years and i think this is the first time trying to print on material this thick. i have the head on high setting and the manual dimensional setting up to .510 (highest it...

looking at new printers. we have roland currently but getting some quotes and had a vendor quote the CJV150 series so wanted to see if anyone has this and if they have any issues. am i even comparing apples to apples? any issues with either printer?

trying to print 3/8 acrylic on lej 640 flatbed and it's not pulling through. material has paper mask-no good. tried putting application tape on it-no good. now going to try a card board transfer/jig underneath. any ideas? maybe it's just too heavy for the rollers?

working on a job for a customer and part of it they want some LED lettering installed on the building. i don't do electrical but they said they would have their electrician hook it up. just looking for recommendations on what to use? i normally get my lettering like this from GEMINI and they do...

haven't had our laser long so new to using it. we have been cutting mostly plywood for our steel rule dies but we also cut acrylic. i am starting to notice some of the acrylic you can purchase has this warning in the spec sheet- THE PRODUCT IS A COMBUSTIBLE THERMOPLASTIC RESIN, BURNS...

customer wants a quote to remove some old letters that are glued to glass and install new letters. (i have not seen it yet just going by customer and pics) what do you think is the best way to remove the letters with out damaging the glass? what are the chances i can clean off the old glue...

not sure what causes this and it doesn't happen all the time but i have had a few jobs printing aluminum composite 3mm where it will start to print and then at some point it will get stuck and the feed rollers will start skipping and the material doesn't move so the print head just does a...

making a lobby sign for a customer with some gemini plastic letters and logo. they want them mounted to a brushed silver base 3/16" -1/4" thick but they want it to be solid. meaning they don't want the edge to be a different color. any ideas what to use? i was thinking just use aluminum...

installed some window perf for a customer. warehouse type environment. they have a fabrication area with windows that they wanted window perf with graphics installed on. there is a hallway that goes past the windows and they wanted the graphics there to see out and not see in (or as best that...

https://www.gogsg.com/ASSETS/DOCUMENTS/ITEMS/EN/Spikedatasheet.pdf https://www.gogsg.com/2327366/Product/IkeGPS_940-2300 anyone know anything about these devices? looks like they could be pretty handy.

quoting a job for a customer and they want a banner installed above the street through town. 2.5ft x 18-20ft. this install is too much for me. the job would be all yours. i usually have merritt do these type of banners for me. i don't have the equipment to fabricate it. would need a price on...

quoting a job for some backlit panels but customer wants them on the outside of the glass with removable adhesive. so far only materials i can find have a perm adhesive. any ideas? i was thinking of just printing on clear with removable but not sure i can get a good enough print for the backlit.

have a job i run and it requires 2mm white coro 18" x 24" (24" flutes) normally get it from harbor sales but they are about 3-4 weeks for delivery and that's too long. trying to find another supplier and this apparently is a tough item because of the flute direction. anyone have a supplier i...

anyone ever wrap a removable glass targa top. no issues here with the labor just curious on how long it lasted and what material you used? did a little research had an avery tech guy tell me that the vinyl causes excessive heat build up on the glass and could cause issues. saw some posts from...

i am quoting a job to wrap a generator that will be installed on top of a sky scrapper in the city. customer is worried about it getting damaged while it's being hoisted to the top and i don't think it's a good idea to wrap it on top of a building that high (also having trouble finding workers...

we just got a coherent metabeam laser. just wondering if anyone on here has a laser? didn't see a laser section in the forum. don't need any help...YET but i am sure there will be questions and issues along the way.