Search results

I appreciate the replies. Aside from eBay and craigslist, any suggestions for where to list it?

We are acquiring a small competitor who has a Roland Soljet PROIII XC-540. I believe it was made in 2008 or 2009 and can confirm this tomorrow. We have other printers that are similar to this one and so we would like to sell it. It appears to be in immaculate condition and his maintenance...

I have already reached out to Hielorojo to ask for his help. Now our Edge 1 has stopped working. The screen goes blank and it emits morse-code sounding beeps. Powering down and back up sometimes makes it start working again, but the the screen goes blank, or shows ONLINE but doesn't respond...

I just sent you a PM. I am out of options and need to try this printhead swap. I appreciate your help!

After confirming that the Edge 1 printhead is the same part number as the Edge 2 printhead, we would like to swap them out. Scott in Gerber tech support says "But, I must be recalibrated . There are a number of things that must be done so it will print correctl. We do not support customers...

The Kyocera part number was exactly the same until the last 4 digits, which are in parentheses. I have to think that is just a production run number or something like that. We are going to give it a shot. A close inspection with a magnifying glass and flashlight didn't show anything unusual...

Interesting......the problem was intermittent, so I don't think it is something physically on the print head, but I will definitely take your advice and look very closely with a magnifying glass. Not sure what I'm looking for but I guess I'll know it when I see it. If that doesn't work, I'll...

After eliminating every other possible part, we are fairly convinced our Edge 2 printhead is shot. We have a fully functioning Edge 1, so I'm wondering if the printheads are the same on both? After a quick glance, they appear to be.........that would be great news.....

Ours opens from the side, so I guess it is a "classic". We will try marking the vinyl.

When you say "three equipment guys", are you saying there are three companies who sell used Edge parts? If so, do you have the names and/or contact info for each? Thanks.

We have been forced to use an older Edge 1 printer while we consider how to resolve an issue we are having with our Edge 2. We have had this Edge 1 for years as an emergency backup, but we had never used it until recently. My question is, does the printer have a "home" feature like the Edge 2...

We have used a Gerber Edge 2 in our shop for many years, paired with the Envision 375 plotter. Over the years we also added a Mimaki JV4, and now we have an HP Latex 310 and a 360. But for short runs, for anything with white, or anything on chrome, the Edge has been our workhorse. After a...

This has happened with a dozen or more separate jobs run over a week or so, with many reboots done in-between. So, unless there is a way that all of these PRM files could be getting corrupted, I just don't see that being the issue.

I appreciate the suggestion, but read the post again. This happens on ALL colors. There is no fold or crease in the foil and the glitch is identical from repeat to repeat. "Or I would unwind the spent black foil....looks like it may have folded in on itself."

We have a Gerber Edge 2 that has developed a strange problem. The job will start fine, then a problem develops, always the same distance from the top edge (3" or so from the top). We have a had a pixel go bad in a print head before and that leaves a thin void in the print all the time, every...

Thanks! I'll give them a call.

We are doing a joint venture with a commercial printing company that got out of the wide format market. Long story, but they needed space and so 6 months ago we took their machinery and are using their equipment along with ours to fill orders for them on a wholesale basis. One of the machines...

Awesome, thanks! I've never been much of a read-the-manual guy, and reading Japanese translations into English are especially painful. But the stakes are high and I guess I'll get an extra cup of coffee and start reading.

We are a graphics company that recently took over some machinery from a company who was getting out of the business. One of the machines is a Mimaki JV34-260. We moved it yesterday and when we plugged it in, it powered up and is on. The other company, who lately hasn't had anyone on staff who...

Thanks Mike! I finished the nozzle wash and still nothing. So I called GRIMCO tech support and they suggested I put the syringe on the tube below the capping station (single tube connecting pump to underside of capping station). I removed the back panel, separated the yellow line at a joint...