Search results

It’s a 1204

Here’s where I am at I did a head cleaning Removed the head and soaked it in with only the bottom of the head small container It was clogged previously and am now able to push through lightly with a syringe for every port and can see fluid come out of the head I have it together and all dampers...

Thanks

I give up!! If I can pull all colors through the capping station and I see all rainbow of colors in the capping station and I get almost nothing to print out of the head, what could that be????

Update. So from what I can tell the head nozzles seemed clear when I cleaned it. I am able to pull all colors now with a syringe. But when I print I am getting a lot of blank nozzles and also none at all from Magenta. I saw a lot of magenta ink come through the line at fist when I started...

I’m asking this because I have 2 other colors cartridges that haven’t been coded as empty I could cut the chip off of for now and adhere to the full black cartridge

Are the specific to the color, so I would need to buy a K smart card?

Thank you It’s definitaly well over half full I’ve never heard of replacing the smart card Where could I get one of those?

Thanks Is there a plAce to pull ink from after the dampers?

So I am able to pull ink through at this point except black The black lines above the dampers keep getting air in them I took the two lines off above the dampers and pulled black out and removed all air but then soon after I connect them the air appears back in the line maybe around 8” of air...

Old thread but quick question. If the printer recognizes the line near the dampers as empty and the cartridge is still full, is there away around this? I pulled ink back down the lines but I am still getting (K) INK END.

I’ve got the head printing but the colors are not looking good at all Maybe still some solution in the head ??

Thanks I did get some in the board on the print head Are you saying the fuse is on the print head or your saying the fuse on the main board inside the machine ?

I did a head soak and cleaning on my DX5. I'm pretty confident its good to go. The issue im having is now that its back in, I'm not getting anything at all to print out of it. I also cleaned out the black plastic piece between the head and the dampers. That was a bit clogged too... and is now...

Dropped it off at the place I bought it GRS and they are going to help me get it fixed Hope it’s not too costly

Thanks

Let me go through everything I moved in June Before I moved it was working good but every so often I would get an error during the auto cleaning After I moved i plugged it in and was going to get it running again except I had nothing Completely dead So I tried again the next day and it...

I’ll have to look Some were current and 05 I think another was 74

That would be awesome thank you Please let me know ASAP

My 1204 has been giving me all kinds of errors relating to the main board. I can't afford to spend the money on a new main board! Its worth more than the printer. I was supposed to have it repaired by the place I bought it GRS in NJ and they now are telling me they can not supply me with the...