Search results

You will be really glad you did. we network everything. even the horrid old Roland engravers & my first Gerber edge the “trunion”

Your dealer is right that FOLLOWING GOOD STANDARD PRACTICE (blowing out the machine, being sure fans are spinning fast enough, unplugging and CAREFULLY reseating all the connectors) as part of your troubleshooting is a good idea. I was skeptical that this was an encoder issue. It generates a...

AS A RULE when this happens, members should assume Microsoft has f**ked it up again. the first thing to try should be a restore point. Go back 10 days & see that it is cutting again. microsoft is playing fast & loose with updates that do more damage than good.

they most likely sent an update to undo the damage they did nothing embarassing, cause to celebrate!!!!!

if you are sure the Edge's ip was 192.168.8.103 change the ip of the pc from 192.168.10.114 to 192.168.8.40 far enough out of range to avoid any conflicts what windows are you on?

both devices have to be on the same subnet. 192.168.8xxx or 192.168.10.xxx either will work but the first 9 digits must be the same unless you do an advanced subnetting i assume either you or the ISP started trying to cloak your ip address (private vpn?) or subnetting changed after power outage

You may have to call roadrunner tech support and have them disable IPV6 or at least set IPV4 as the primary or dominant protocol on your network. if needed I will give you a cell number to call me often ISP’s have no idea what their changes will do to your business network

Start by going to network properties DISABLE IPV6 i am not quite sure what the trigger event is that started this (ISP or cable company making changes from above?) OR power off your ENTIRE network. cable modem or fios box,your router if you have one, distribution switch. leave all powered...

it is always possible that the fuse can test ok, when doing a continuity test, but, the 41VDC is missing are you sure one of the ribbon cables doesn't have one foil lifted and bent over touching another connector

Thank you!

THE UPDATE is not supposed to fix the issue. the point is you are on the phone with a “tech” who is simply putting your problem in a piece of HELP DESK SOFTWARE. simply a troubleshooting flow chart (IF this, THEN …) everyone has to be on the same version so the software matches your screens...

i will check, i have never bought from fellers. thanks

a long time client asked this weekend why we don't make tyvek banners. i looked, i think we ordered a roll of tyvek from "the plastic guy" on ebay, when we needed something for the landlord joe's question really is i think "why can't you make a tyvek banner, as cheap as the cheapest scrim...

Very true. Butey have to understand a little bit about networking. usb is reliable AS LONG AS you document the naming and remain aware of it usb CAN “plug & play” and change things. HOWEVER you do it NAME THE DEVICES use a label maker. So anyone knows which device they are choosing. possibly...

i would imagine RETURN POLICY is where it will all fall apart. and how does this work with shipping on the roughly 15% return rate? who absorbs that cost? did you discuss who will keep inventory, you or your client i have never made an amazon sale but i believe there is a penalty if you have...

not to be devil's advocate, but, no one ever was unable to print properly because of the lack of a head rank number. you might not be able to use your existing profiles and color match a previous job perfectly, but, to tell you the truth when we put the new head in my mutoh, neither of us...

it is impressive, but remember, the algorithm records changes. there are no "deltas" in a black box. make it a gradient and see the size, or a rainbow or a color wheel

although ii almost bought one of these last week my epson experience is with older stuff you will have to google

Did IP address of printer change?

Sounds like something in the step in the rip is different. do you have multiple “setups” and chose the wrong one? is printhead different somehow and not allowing machine to initialize?