Search results

Does anybody know where I can get the printer drivers for this HP Latex 365 printer to be installed locally in my computer? when I go to HP.com the only thing I get is the firmware, but as far as I know, firmware is for the actual printers and not the computer; we have a new hp latex printer...

Great, but I need to know first if it stinks, I have a problem with that in shop as the place is shared with Postal services and they complaint a lot about the smell. By the way, I will add this to it, my printer is now doing the test prints as normal, thanks to you, but since about 3 weeks...

great.... Thank you very much.... another questions, do you sell a primer for ink adhesion that it is odorless?.

I now know that I looked at the wrong info, looked again, and I found the following: SYSTEM PARAMETER 132=2 SUPPORT is this the one you are referring to?.

Thank you very much again.... I just looked at it and it is set as follows: System Parameter: 0=0 R GRIP

Solventinkjet: it has been a while since I checked this forum, I just saw this answer if that is the first thing I did, in fact, yes, there is a # sign in from of the last menus, and the machine still in services mode, now could you help me by sharing how to get out of services mode if you...

Problem came back, but I now was told that we do not need to replace the radiators near the coolant pump, but the "water jackets" on each of the lamps.

:toasting: Happy New Year :toasting: Does anyone know how to check if a Mimaki JFX200-2513 was left on services mode?, it prints fine, but some things are different, one print head shows the all 4 colors and the other print head shows also 2 colors plus 2 white, when before it showed the color...

I think I have solved this problem, it is the radiators on the machine, I took the hose off the pump (the one that sends the coolant to the lamps) and blow it with a syringe, it was hard to push air, did it a few times, but plunger will return when released the syringe, decided to use a...

Tension is the problem, if you are curling upwards, the top roller is too tight .... if doing cold lamination, I use my hand for tension, it comes out very flat (you may not need too much tension as this will stretch the film and curl after)

did you try hard cleanings? also, what I do is pull the ink from the hoses before the waste ink bottle, I close one hose with a black paper clip and pull the ink from the other hose, switch and do the same and then a cleaning and a test print... it has worked for me.

you have to use it to learn it...... I am not an expert, but started just like you.

I do this quite often, what I do is that I precut the dibond, then if all the same size, print a template on the flat bed (on the flat bed, no material, print just the corners) for the panel size, spaced about 1/2 inch then apply the famous "magic tape" at the edges of the template on the flat...

Hi all Do you know where I can get the service manual for a Mimaki JFX200-2513?

I have some new information, talked to a tech, he had same problem, what he found is that the radiator on Lamp_2 was clogged, (after this radiator, the coolant will go back to the pump), he cleaned it and machine worked normally, coolant was not changed in about 4 years.

Gregg tech was here again, he flushed the lines at the lamps, and cleaned a little of dirt, checked that everything was fine and left, I do a test print, and he probably was not a mile away when the message about overheating lamp came back..... he mentioned about replacing the pump, do you know...

No, not errors, just that message about Overheating Lamp_2 comes up, then I stop the print and continue after a few minutes, the workaround for now is to print unidirectional mode, that way I can print full coverage 4x8 with not problems, well, except double the time. Do you or any know a...

Tech was here already 2 times, and I just got the message again, he drained the coolant and added new with distilled water...... and after second visit, the UV lamps do not come on, when it used to when doing regular prints.

I am getting this message Overheating Lamp_2, tech already came and found that it had a lot of air, mentioned probably leaking, it was 10/18/22, lasted about a week, last week on 10/27/22 started, and to continue printing without problems I set the printing mode to Unidirectional, this way the...

first, what is second surface?. I do this kind of job often, I do print reverse on clear but I apply white to the image only and they look great.