Search results

ok thanks i think when i bought the printer it had a gold looking head on it not the dark looking like the mimaki head i bought so if i am getting this right all i have to do is put the memory board on the cheap printhead and that it man hope this works if my head is blown thanks a bundle oh i...

can you recommend a printhead that will work with with the firmware and memory board i have if that is not too much with out causing you any trouble .

https://www.digiprint-supplies.com/en/mimaki-jv33-jv5-print-head-with-memory-board-m007947-pphmijv5002 i think this one have a memory board on it my firmware is 4.3 i think but was reading that i can down grade to 3.6 or something like that to use cheaper heads in my country the power is crappy...

yes i have check the main board and it reads at 17 k so the main board is good what was happening was the printer would come out of sleep mode and do its auto cleaning and instead of going back to sleep mode it stays on and will not shut off via the green button i have to use the main switch to...

thanks but i think i found the problem it is one of two things i check the slider board and one of the iu pins is reading at 2.5k instead of 5k so i am hoping that it is the slider board and not the head cause i just change the head about 6 months ago

thank you i know i was doing something wrong cause no one would answer me thanks .

can any one kindly help my mimaki jv33 -160 would not boot up was working fine and about two days ago it started coming out of sleep mode and would not go back to sleep mode and now it is not booting up any help would be nice hope some one sees this and help

hi anyone need some help here i was asking about my mimaki jv33 coming out of sleep mode and switching on and would not go back to sleep mode after auto cleaning but now i have a bigger problem it started to boot up and when the head moves back the machine just goes to boot and will not turn off...

my mimaki jv 33 160 does it's auto cleaning and stays on after it does not go back to sleep mode has anyone seen this before and is there a fix for this any help would be great

my mimaki jv33 160 comes out of sleep mode and switches on and it powers off when i try to print it will only work properly when i switch off from main power and start it up again was working fine doing it auto clean and then go back to sleep mode now when it do it's auto cleaning it stays on...

thanks got it working it was air in the head took some time to get it out but got it now my black is giving the same problem will have to do the same thing with that channel and lines.

i think there is air in the line cause the dampers are now fully compressed and have no ink in them the dampers are news but i keep reading about the o rings are those the o rings in the clamps at the top of the lines.

my jv33 160 dampers losing pressure on cyan and yellow after i change the dampers they would not compress when i do a fill up this happen after my cyan cart was changed out for new one the cyan and yellow just droped out is there any way i can solve this problem.any help would be welcome

i would like some info on wholesalers for banner and vinyl in usa peffered they be in miami

just a suggestion here but i think the inks you are using is causing the problem try another type of black ink i use sts inks and they work fine on my jv33 with no problems and you can try soaking the heads for a while and then try a normal clean but bulk cartridges like the ones you are using...

sorry but how do i do that i just came across this post and taught i would get help thanks any way

i tried all of the testing the other problem here is that the machine gives no errors just goes back to boot when the cleaning is done, i would also like to know where i can get original mimaki parts and if they will be willing to ship it to south america .

i am new here and would like to know if anyone has come across a problem like this my jv 33-160 was printing fine and i left it for a day and then i heard it making a hissing sound as if it was try to send pressure to the head when i look at the screen it was blank and i could not turn it off...