Search results

I'm a graphic designer also (0ver 25 years at Texas Instruments and Dell), but I would NOT pay the newbe tech to install a power supply, even you can do that, it's not rocket science, look at the old one, take photos of all connections, remove, add new power supply, fire it up! Save a couple...

Ok, got it back working! First off, the STEP settings was off in the cutter, it was set to 254 and the STEP setting in CM2 was set to 2540 (for fine detail), so the cutter was cutting everything 10 times bigger, lesson learned. And whenever you re-set to factory setting it goes to Japanese...

WOW, know I have another problem! I had put this info on the USCUTTER forum and one person suggested I do a Factory Reset by holding down the up arrow while I power on the cutter. So I tried that, and then it asked me to select HP-GL or GP-GL, I selected GP-GL and then for some reason several...

I have a Graphtec FC7000-75 and having some weird issues with it, after changing the cutting blade and cutting strip, when sending the next job to the cutter it went crazy, it started cutting the job sent from CM2 about 10 times larger than the orig. AI file, I stopped the job and tried to send...

Yes, the 18" x 24" graphic is contoured cut into three pieces, I just didn't know if you use on of the CLEAR plastic looking app tape when supplying for customer install (so they can see through it better). :thankyou:

When providing print and laminated graphics for customer install, what type of app tape do you use on the graphic? I usually install what I make, but there are a few who want to install the printed, laminated hood graphics themselves (18"x24"). Oracal media and laminate. :thankyou:

Yes, Gino, I did communicate with Jerry (SW Product Manager), he said he would look into it, then Taffy the Customer Service Manager called me, I'm pretty sure they spoke with each other as they are both at the same location. Taffy apologized and said she would ship out them missing blade that...

I emailed them and called and left messages on Monday, no reply till Wednesday. Then their customer service person "Taffy" said she would ship the missing blade by FedEx Wednesday afternoon so I would get it on Thursday (yesterday). Guess what I got yesterday? NOTHING! No FedEx, NO UPS, NO...

Z Signs, So how is the new toy from China working out? It looks fantastic in the stock photo, is the fit & finish good, better or best? What was it like for any taxes etc, to get it shipped to the US? You say you paid about a fourth of the cost of the Roller, what was your final cost...

What happened to Sign Warehouse? I have bee purchasing products from Sign Warehouse since 2001 when I purchased my first Graphtec cutter from them, over the years the service has been getting progressively worse. My last couple of orders have been really messed up, ordered and paid for a 50...

So this guy did something VERY Illegal in 2001 and the sign is still up today and he did go to jail, how did tat happen? He posted a video about him breaking the law...:omg:

T H A N K Y O U ! :clapping:

Anyone know the three (3) fonts used here? I have something that will work for "BAR & GRILL", just really need the "WHISKEY BUSINESS". :thankyou:

I use the 2014 "Car'n Truck" vehicle outline collection, like all of them they are only close, I have used several different vehicle templates over the years and find them ok, but I need to make measurements off the vehicle, remember it better to measure twice and cut once. I think it's better...

I purchase 1x4 select popular from Home Depot, which is Kiln dried not green like other lumber, it is made for building cabinets, doors and other finished trim items, and NEVER shrinks. I don't know what type of lumber the OP purchased for his frames, even 1x4 pine comes in different grades...

That sounds like it may work, where did you get it and what Is the name of the 10mil materials you tried? Does it come in BLACK? :thankyou:

What is the thickest semi-rigid PVC type material you can cut with the standard vinyl cutter? Anyone tried to cut anything heavier than the typical sign vinyl? Thanks for any feedback or suggestions...:smile:

:goodpost: Yep, I was going to say something about that also, anyone can purchase software, however only a few can take that software and hit the ball out of the park....Like JD! There is NO automatic button like you see on the Staples commercials, you have to pay the dues to learn the...

Thanks Rick, you were 100% right on, I looked and found a few close ones but you got it!!!!!:thankyou:

Yes, and neato does some fantastic work with Corel, as well as Joe Diaz, they are masters of Corel.:smile: