Search results

Our local hospital uses very similar signage, and they are covered with Formica plastic laminate and then have white vinyl graphics applied to the surface. Looking close at the bottom corner of your photo, you can see the darker core of the plastic laminate which tells me it is plastic laminate...

What is causing this (see attached image)? See the attached image, I'm printing a banner with a Roland SP-540V and the FIRST 1" or so the ink is NOT laying FLAT, there seams to be what looks like the ink is pooling, then it get better and looks ok. Is this caused by not enough HEAT, like maybe...

Frank, as I mentioned, I have never used the manual crank method, if you do use the crank, will that effect the cap to head height settings, meaning is there a built-in stop that prevents you from going to far either way? How do you raise or lower the caps? Thanks

Thanks, but I finally figured it out, and for next time I have made a decal and stuck it right on the printer so I can remember hoe to get into the Service Mode. Yep, I have the metal tube but never used it, I think the installer told me it was for use in case the print head was printing and...

Ok, so I finally figured it out (see the attached drawing), you have to pause for 5 seconds between steps 2 and steps 3, then it worked. But it's a real pain in the but because Roland doesn't want us doing this stuff. They want to come do it for me at $150 an hour and a round trip charge of 2...

NOPE, that is NOT what you told me, here is you exact quote, (your words): Have you updated your firmware? I think it changed one time if I remember correctly... Here is what gets me into mine now: Service Mode: Down Right Left Up in that order, one at a time then: Right Down Left Power...

Can anyone help me, I can't seam to get into the service mode on a Roland SP-540V. My notes have a few different methods and I have tried all of them, but I keep getting the message SERVICE MODE IS PROTECTED! Trying to change my CAP-TOPS. My manual says: Hold down LEFT-DOWN-RIGHT together...

Please disregard this request, I found it: Liquidism part 2 Thanks away...

Anyone know this? Similar to Plasma Drip but not as many drips...

WOW, how the H$LL do you do that? Being two different fonts, I would have never guessed that! :thankyou:

I found the best plan is to pick a media profile you like that has WHATEVER ink saturation you want for your media. Then print the Roland Color Charts on your media of choice using the media profile from above. Then after the color charts dry, you can select the color you want to match, I use...

Calling all fonts Gurus - I need help whit this one? I have seen it before but can't think of the name.

:thankyou: For the life of me I couldn't figured it out, that worked!!!

Fred my mail box is full, and says I need to delete some messages, when I select the BOX on the right of the message, the message gets highlighted in yellow, however there is NO way to delete the message(s). I think in the past after selecting the box on the right, there was a DELETE prompt at...

I sent you an email, I hope this helps...

Lesson learned. Next time purchase a printer with US support!:rock-n-roll:

Pat, the caps are for a club with over 700 members, sure not everyone will order a cap, and there is the size issue to deal with, so I don't want to pre order 200 caps and be stuck with od sizes. Once they do the setup, then after the first order of 20 caps, they should be making money from...

Anyone here do dye-sub printed flags for the trade? I have a customer who is looking for custom flags, like you put on car windows of sports teams (11x15), I tried to print with my eco-sol printer on a fabric sample but the fabric (treated for eco-sol printing), however it was just to thick and...

One more shot at this: I have two local embroidery shops that will do the WHITE logo on black FlexFit caps for $9-$10 per cap, one charges a $25 setup fee the other does not, however they have a min. order of 24-25 caps. Is this the going rate and min. quantity for wholesale t the trade...

Is this bowing effect only on the HP Latex machines, I have not noticed it on my Roland?