Search results

Not exactly answer to my question, but it is very informal and educational, so - thanx, rozankan! I tried few weeks back to test colors from Roland palette - reds especially, though, I noticed there is very little difference - if any - between reds that are close on screen - I mean, I see...

Is there a way, or a profile tweak, to improve quality while remaining speed of prints that has large spaces of same color? 4 example, if I have whole 4x3 meters billboard red with little letters in the middle, is there something I can do to, 4 example, make dots LARGE (or turn off wariable...

:{DDD u know, sometimes it is best to FORGET U have a problem for a while, and then, U just might see the solution, or realise amount of Your own over-work state. Anyway, problem from above, and thing that was missing is acctually LENGTH of material information. And the reason is - :{) I've set...

funny, I just wanted to say same thing as kage. More as idea then the fact - or, to spill my brainstorm, - silicon surface that alows things to be peeled off without ruining the surface could be easilly used for some things that need temporary branding. Reusable packages (simple boxes made...

Hi, ppl! I kinda - don't know at this point is this a problem or not, - been printing all day long, 12 hours now, so my brain is melted and I am amazed and proud of myself that I can even write this post and make complete sentences! So, I've just finished printing, and RS640 went on standby. I...

... well, my opinion is this: If that one job can earn U enough to buy that machine, and if You can see Yourself DEVELOPING - expanding your market to people that have those special, metallic or white needs - GO FOR IT! Yeah, metalics print slow. Yeah, U need to shake cartridges. Yeah, it does...

Sorry 'bout attach part - just thought I would save U people meg or two :{) And, thanx for Your comment Sticky Signs. It sounds logical, what U said, and I am gonna try same job (sample, of course) unidirectional tomorow, just for sake of my peace :{) - since unidirectional means also - a lot...

update: I did manage to find combination of heat settings and feed calibration settings which makes print BEARABLE only. But, 2 things I also noticed: 1. While printing, there was a roller "footstep" on my prints. But not all rollers, only one before last (most to the left when looking face of...

And, yeah, one other thing I did in between nobanding and banding: I upgraded to VersaWorks4, and it's great, and, I am not sure if something there can be a problem???

Hello! Call me superstitious, but whenever I say something good or in pride of stuff, something bad happens! :{) So - do not talk good about things :{DD Anyway, I need to print 500 - 600 sqft vinyl, on my VersaArt RS640, started yesterday, and thought of speeding things a little bit. So I...

Hello. After one year of using our Roland RS640, we are thinking of switching to third party colors. I must accent: we were very happy with Eco Sol Max, it printed good, no drying issues except on translucent paper, and most importantly: no problems on our printer caused by color, no clogging...

DO NOT SHOOT SUNNY PHOTO! Sun makes it too warm so U won't get needed effect. Do it in a shade, but not too deep (if You have light meter it should b around 5600 k's) WITH WHITE BALLANCE ADJUSTMENT to Your camera, so U get color as close to original as it can b. If You can not set white ballance...

One really weired problem: I've printed some stickers, on Roland RS 640, and need to cut them on my Graphtec FC8000-100. I've used segmented reg marks, and sheets with decals are 1m wide, 1.30 meters long (so, only one segment) I've done this type of job many, many times, and never had a...

... huuuuh, I think CE series DO NOT HAVE ability to read reg marks!!??!! I have a roland printer and fc 8000. No problems, printing nor cutting. U can print then cut any size, though, since reg marks do take some space (1.5 cm away from print) and u need some space for cutter rollers, u can...

^ I know, i just thought if I am not right, someone should move this to correct forum (I thought U mean I didn't put it in correct subforum) dtginks.com seems ok online, I just need to guess right time to call and see if we can make shipping arrangements. Thanx all!

I don't think it is a wrong forum - I am talking about direct to garment printer?? But thanx for the tips, people ...

Hello! I need a contact to a supplier who can provide a DGI HM printhead (it is an Epson head, but I don't know exact model, i think it is 2400) Also, dumpers and possibly ink tubes with the head. Now, the supplier should be from europe, or willing to ship goods to europe. Also, UPC or DHL are...

You must B thinkin' on VS 640? Unfortunatly, not there yet! :{) I have RS 640 ;{) but I'm coming there :{D

@ artbot: I did not try unidirectional mode, but I recalibrated bidirectional mode, ... it was off by 1/2 points at some segments of the test (more precise, 4 components one) - didnt help at all ... Anyway, guys, it seems it's GODDAMN VINYL - IT WAS THE MAIN PROBLEM. Or, to be more precise, it...

I have air conditioner, its just we jumped from 25 degrees celsius to 34 in 2 days, its like that here in mediteranean area :{) And, morning sun goes directly in the room where our printer is, through the wall that is - a window, 6by2 meters. So it is boiling in the morning there. I will mask...