Search results

You have been given the steps be thankful and please do search the web for tutorials first. Now I have to say that some here just love to flame others instead of helping it has gotten out of hand in my opinion. However I dont think Bob was being that bad after all he did tell him how to do...

heat gun or steamer as others have posted and a small squegee probaly a lil chissler(but be carefull with the lil chissler its plastic but can scratch paint) the rapid remover is awesome for the adhesive. If you use the rapid remover all you have to do is get the vinyl off you can leave LOTS of...

As others have said look for a scratch under the head if it looks good could just be clogged. Your black head could be cleaned up and may recover some of those missing nozzles not sure since it been clogged for so long. Here is what I would do if there is no scratch. Do this to the black...

Post a pic it would really help. As for overspray on my JV3 it usually means a nozzle or nozzles are deflecting sometimes a good cleaning will fix it. Also it can sometimes be that something has shifted and the alignment is off but this is usually shown as over spray to one direction only...

I know nothing about versaworks and roland printers however I often have problems finding Factory profiles for our JV3 as it is a S model and was only made for a short while. I run JV3 SP profiles and have had a few issues but found a few that work good for the materials we use. In fact I...

If you are looking to do mainly wraps I would go with the inkjet due to cost of ink speed of print and it can print other stuff as well. I am not very familliar with the foil printers I run a JV3 full solvent as for spot colors or good prints look around if you have your stuff set up right and...

Removed what I said dont want anyone getting mad or damaging there heads.

Buying a printer is a big leap there are lots of things to consider. Example you will need a laminator, rip, inks, media, laminate, cleaning supplies, tech work, etc... Know We went out and bought a used printer 60" and i have to say that at first we spent a lot of time LEARNING to use this...

I would say dont worry about it if he doesnt pay or hire you it may be a blessing. I get half upfront period and if they decide to not go with the graphics I subtract my hourly rate for the design work from the deposit and give them the rest back along with a written form stating that I own...

Welcome to Signs 101. Yes we all started somewhere and if you put the time into it you to will be better. My first advice is to get a few books on layout and design. Second I recommend you get some books on the software you are using. Third read lots of posts here on signs 101 there is lots of...

I have used photoshop for years and Lynda has good info. I like youtube lots of good free info there also. In fact search for "you suck at photoshop" on youtube the guy that does the videos is pretty good and they are easy to follow. I have learned over the years that the best way to learn any...

I am no screen printer but I have played with it a little and based on the image I would say it will need to be 4 color process no matter what color shirt you put it on. As for black and grey shirts versus lighter colored shirts the only real difference is you have to lay down a base coat of...

When you go to run the install for the USB driver try right clicking it then run as admin. If that does not work then right click, properties, compatability tab ( I think its a tab) and select from the drop down box 2000 or XP and it should work. You mat have to still run it as Admin after you...

Like Pro wraps said Apply the panel and trim as you go around the brackets not hard just have to go slow and trim straight.

I agree with bayshore Razor knife, long table and a long straight edge. Thats what I use for everything.

I have used merrit in the past and was very happy with there product and service turn around time is a little long but I can wait if the price is right. I have read other places that many people seem to have good luck with vinyl applied to the flex face and some say that if you put vinyl on and...

Ok learned some stuff so I am editing this post. Here is the deal I have a large 15' by 15' flex face in a back lit cabinet the flex face is white never had graphics on it. The face is installed in the cabinet I am wanting to know can I put cut vinyl on the flex face some say yes some say no...

I have never been burned by Avery and was looking at going to the supercast 1005 wrap vinyl. I know that many here HATE Avery. I have a question what products by 3m and Oracal (the companies that I use) are like the Avery supercast? I have played with small samples of the supercast stuff...

Hey Wraps, Could I use some of the pics in your gallery on my website? Really I am asking you for permission.

Where did you get the head unit? I have heard that the 10600 had the dx4 heads but I was told that you can not buy this part you have to be an epson dealer and they install it. Also I have heard and spoke with those that I know to know what they are talking about and they say that the aquas...