Search results

i have a job for a customer to make 3/8" x 3" magnetic nameplates i think they are using them to identify stock on pallet racks. i gave them samples of .030 mag same as what we use for our vehicle signs and they claim it's not sticking good enough. i think part of the issue is it is so small...

i am sure i am not the first person to comu up with this one but... i am running a short run of coro signs 18 x 24 only 10pc so i was thinking of a way to run multi-up. making a jig, use a bigger sheet and cut it down and then the dim light bulb i have went off. i just tape them together. i just...

i am printing 4x8 3mm white sintra on my roland lej-640 and the finished image has some lines where all the pinch rollers are. i never noticed it with any other material . any ideas on how to get rid of them? i have got similar lines when printing on my xc-540 but you can remove the rollers on...

i was watching an episode of muscle car yesterday and they were doing a spot repair on a camaro hood (it had a couple of small dents) and they had to remove the SS stripe. so the guy proceeds to remove it like it was vinyl that was just applied (it probably was) and says you have to go slow or...

i have a customer looking for neon for some counter displays and that is not our cup of tea so if anyone is interested i will give them your contact info. i don't need to get involved so it would be a direct sale for you. the closer to NJ the better it might be but they don't have anyone right...

one of my customers i do their fleet up here in NJ they have opened a new location in Austell, Georgia and i am trying to help them out with an installer in the area not sure how many vehicles they will have but the use ford vans E250, M2 box trucks and NQR cube trucks send me your info if you...

one of my customers i do their fleet up here in NJ they have opened a new location in Chantilly, VA and i am trying to help them out with an installer in the area not sure how many vehicles they will have but the use ford vans E250, M2 box trucks and NQR cube trucks send me your info if you can...

customer called about getting some backlit panels for an LED menu display. they requested duratran material. i searched and got some info but not enough to purchase. does anyone know anything about this material or where to get it? i couldn't find a vendor/ also couldn't find out what types of...

i know this has been done before but i had a few large jobs and just started building it up approx 7 working days 13 kenworth flatbed trucks, 2 freightliner 24ft box trucks, 1 honda fit, 25 sheets of cut vinyl web address and phone numbers for a customer and this is what you get. it's approx...

had our holiday party and got a holiday bonus today! one more week of work and then holiday shutdown life is good!!!!!!

right now our xc is set to print with white ink. can we convert it back to full color (lt magenta and lt cyan) and if we do this will get better resolution and faster print times? (not that any of that is bad now but we have the uv that prints white so no need for the solvent white any more) and...

not too much yet, i will post more as we get going heavier. also since i held my phone on it's side the vid came out wrong direction sorry this video posting is new to me..haha http://www.youtube.com/watch?v=YyANP6NERH4 http://www.youtube.com/watch?v=d9txo_z3wm8...

here are some pics just running a dbl sided coro sign had to build a jig/transfer sheet to run it through so it would print to the end. also if anyone can tell me how to get rid of the overspray that would be great

http://www.youtube.com/watch?v=_YQpbzQ6gzs this is too funny. you have to watch the whole vid there are a couple of the kids that are hysterical

the LEJ640 is up and running...IT KICKS ***!! we were able to print on all the materials we silk screen on(so far) only item we had a problem with was a corogated box but i will figure that one out (it printed ok on the box but had some issues pulling it through, rollers slipping) all the main...

just took this baby off the truck set up tomorrow and training tomorrow and thursday

a big thanks to Dan Ramm @ TyrrellTech-NJ for great service! the other day i received a roll of material, ordered from them but drop shipped from the manfact. and it was damaged (not Dan's fault ) and it caused a jam up on my roland vp so they are working on a credit for the damaged material...

running roland vp-540 and xc-540. when i cut square corners sometimes the corners don't cut. sometimes it skips or misses a spot and the corners don't meet at the point ...see pic this job is printed on reflective vinyl with oracal 210 gloss lam i have had it happen with regular vinyl also. most...

just got a new epson 4880 blackmax and setting it up but it won't take the inks. everything is brand new out of the box. it says set ink cart.s so i do that and then it says please wait.......then after a few minutes set ink cart.s comes back up anyone know anything about this?