Search results

This would be in line with what I mentioned previously regarding Cyan mixture colors and printouts. Had to basically raise passes up to 12 or 16 just to get less noticeability and better results for those smoother color blocks. The results would be in line with when the printer was newer with as...

Yep that's another way. Sometimes the chips in the cleaning cartridges read wrong and it thinks it's empty but obviously isn't, you can rip them open and pour out leftovers. Will last you forever.

The original bottle will last years. The replacement bottle will probably go through several price increases until you buy it, and then that will last for years. Not sure if you will still have the printer at the end of the 2nd bottle, but if so, the 3rd bottle will be even more expensive than...

I just connect it with a long USB cable to make it easier to recognize. It just has to be off the single computer to cut unless you play with and figure out how well it works sharing the device like a printer. Other than that, TCP IP has given me issues before and the quickest fix was USB...

I had ONYX 12 GamaPrint for running an S80600 and Windows 10 had issues with me running it. I had to upgrade to Onyx 19 to fix things, but then another issue of Fotoba lines didn't work correctly as a problem with Onyx 19. For running Windows 7 in VirtualBox, you'll need to configure settings...

Download the Epson Edge Dashboard software after installing all necessary drivers and software for your printer, and then load the software up. There will be a little cloud-looking button with a down arrow in the local profiles list section that should pop up a new window for different...

Get an Epson R5070 and ink costs will be as low as $0.15 - $0.13/ ml to print with. There's your low ink cost, works on fabric. Uses an optimizer base and water based resin inks for printing. No smells, half the price of a Colorado, and inks are likely as well. Buy 2 and double your speed vs 1...

You should be able to batch the jobs together and specify in the RIP even if you are using Epson Edge Print or ONYX (Preferred).

To help OP decide... my comment on this is that your FC8600 still has MANY years to go, you'd have to wait til the software is obsolete to run it before you retire it from actually working unless something tragically failed on it. Have an FC9000 now with a new business, and there are new...

You just gotta know how to apply.

Really good organizations! I've gotten quite a bit of equipment paid off as a result over the years. I 2nd these organizations.

Just FYI, glow-in-the-dark material is only supposed to last a few years at most in general. So, it would be temporary even if someone does chime in on being able to print glow in the dark (I've had a request before as well). Reflective signs can be printed by anyone with a printer, just need...

I have an S80600 and I have your issues with mostly Cyan-related color mixes, and almost always 3M profiles. I have contacted Epson support years ago regarding this and the issue seems to be "software" and not hardware. The main culprit I see is the 3M profile. I have switched over to just...

I personally recommend 1Password for everything. Similar to BitWarden, there is a master password you remember, but that's it. The 1 password you need for 1Password, is just that, 1 password. The rest is auto-generated and secure. You can set lengths and complications. You can have multiple...

I have the Epson R5070PE (Not the L bulk ink, other than the ink drawer, everything is the same) A full 150ft roll at 6pass with high-resolution rasters and vectors comes out about in just under 3 hours. Quality is 90% as good as Epson S80 in quality at 8-12 passes. 9 Passes and up will bump...