Search results

Try Tyrell Tech in MD

My guess is it looks like an old sign Suppliers stock formed plastic from back in the day (not Gemini but something like them) prob one that doesn't exist anymore.

this is a throwback post! I had a ANA back in the day.....keep you cable short...under 10'. also avoid using adapters.....use a 25 pin cable and make sure your pc's 25 pin port/adapter in configured correct. idk about your picture, but get new cable.....any pc store, staples, bestbuy would...

because the glass is very heavy, very expensnive, and a glass company refered them to us...lol

I'm doing a 4' x 8' white board on standoffs!!!! This need to be on a Clear with a light opacity frost film 2nd surface (so you can see the wall graphics) but my question is...... How thick would you go? 1/4" 3/8", 1/2" ?????? half inch is about 75lbs thoughts on going with a Polycarbonate...

basically impossible to type out how to do it, you tube window film California Rolling Film or back rolling window film subjects, should get something. If you have a paper linear or tight synthetic you may need to have someone pull it for you or help flip.....Keeping dust out is always a problem...

Thanks! Thats what i was looking for!!!! You rock Umca!

I have been tweaking some of my print modes in Signlab VPM, looking to improve performance, speed and quality for some of my media because of lack of available print modes for VPM To understand it better does anyone know the difference between Wave 1 and Wave 3...I'm guessing speed.....I have...

no they don't, you can find a local tech, I've taken mine Tyrell tech in Md for a fix . its easier and faster then shipping it around, and cheaper than a house call. a plotter is easy enough to transport yourself.

you want to use a multi meter, check continuity by touching the leads on either side of the fuse. that will tell you if the wire inside is good.

+1 on the 3' depth and 6x6 posts. How i would install it too

nice, and the ink took good? not familiar with LLumar as much IIRC is that a white frost? I'm have worked with the NRM PS2......Ive been wanting to print on a white frost but not sure it would take eco-sol ink

yes they make them that big, they are hydraulic......and big $$$$$$$$$$$$$$$

What type of Printer? UV?

print on clear and add a white window film behind the such as a 3M Milano or San Marino.

you don't want to use etch for the frost doesn't offer enough privacy and two layers i more sq ft to buy and lay for no reason, you need to go with a more opaque frost such as a 3m Milano, San Marino.......3M Dusted Crystal would work as well......although is more like vinyl actually the thicker...

most eveything is made in china, problem with America today! Either way they are much better then the UStech lams, which has a even crappier website....

not sure but the company is located in St Louis.

no such thing as one way mirror tint.......you can always see in with interior lights on.....they think it like csi watching threw the window.....its dark in there thats why they cant see back.....if you use spot lights and bounce light off the glass/film on the reflective side that would help...

yes it will wake up and clean, no pc connection needed for that...if you sleep printer friday at 5 it will wake up and auto clean at 5pm Saturday and Sunday on 24hr cycles.