• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. HP 360 Print problem

    Can you rule out a feed problem? If yes, it could be the maintenance cartridge.(contaminate the color heads with optimizer. This instantly clogs the heads. But you should see that in the nozzle test print) I have seen the rubber on the feed roller getting slippery and needs cleaning. (Pretty...
  2. Roland Plotter Pen

    Those are HP pens like for the HP7475 some 40 years ago. If you want mileage and no dry-up, buy a Mimaki ball pen. They come with the latest UCJV330 for example.
  3. Color problem on Roland SP-540I

    Truerich2 or 3 in Versaworks 6 should do the trick. Be sure not to select "preserve primary colors".
  4. How to revert back to an older version of VersaWorks?

    I keep a 6.14 for older Windows versions...
  5. Advice needed re nozzle dropout

    Are you using cheap Chinese captops?
  6. First time with CALDERA RIP Help needed

    To be on the safe side, disable DHCP in the printer and manually assign the IP and subnet of the printer.
  7. Question What’s the Best Humidity and Temperature for a UV Printers?

    Try to reach 45-50%. You will have less electrostatic issues. For humidifiers, if you use a ultrasonic atomizer, use demineralized water.
  8. Latest and Greatest Updates

    For all MS bashers and Apple-hypers During the time I'm in the sign business(1988-now), Apple not only changed their OS often to a point leaving all your application software useless, they also switched the external hardware (SCSI, FireWire, USB, Tunderbolt...) and CPU's (68000, PowerPC, Intel...
  9. Unknown serial number

    Maybe the dealer, that originally sold it, has a Peck file. (I always pull a Peck file, when I install or service a printer) Or Roland can tell you, if the printer was registered.
  10. Getting the same output from two different RIP's? Same ICC profile, same printer...

    If you use the same ICC with different Rips, your linearisations and ink limits need to be the same as well to start with... it should be possible, but you need to understand your Rips.
  11. sp 540 v, versa works 5.1 software

    Can you ping the printer?
  12. Question Version of versaworks compatible with XC 540 ?

    I would say so, but doesn't work.
  13. Unknown serial number

    Since it is out of warranty, nothing will happen. The serial number is also on a sticker on the printer, or in the Peck file, if you ever saved one. You can also see the old number in Versaworks, when you disconnect the printer and start Versaworks and doubleclick on the printer.
  14. Need Help Roland BN-20 "Setup Sheet" error

    There are more sensors involved setting up media. BN-20 can be picky, with the media width. The position of the pinch rollers(the left one is movable only) is checked by a sensor on the carriage. The lever position is also checked by a sensor. Then there is the sheet sensor. Start the service...
  15. Question Version of versaworks compatible with XC 540 ?

    Main differences are. 5.X is a PostScript Rip running in 32bit. Dual and VW6 are PDF Rips and the actual 6.x is a 64bit Rip with many additional features. Dual was only availabe for a short time and all the supported devices are also supported in VW6.
  16. Improving precesion of old summa cutters

    Those sleeves are each measured and then grouped to have exactly the same feeding properties on one rod(drive drum). I have seen this multiple times during trainings at the factory in Gistel, Belgium. This is one key factor of Summa's outstanding cutting quality. I have replaced a few of them...
  17. Question Version of versaworks compatible with XC 540 ?

    Won't work. 5.51 is the latest version for the XC.
  18. Roland LEJ-640 Print Head Issue

    Set it to "linearisation and ink limit only" otherwise the profile will add colors to a 100% black.
  19. Can Vertilith work like Versaworks?

    Versaworks 5.xx and older used to have problems with CutContour when transperancies were used in EPS files.
Top