• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Trouble connecting to Gerber Edge FX

    both devices have to be on the same subnet. 192.168.8xxx or 192.168.10.xxx either will work but the first 9 digits must be the same unless you do an advanced subnetting i assume either you or the ISP started trying to cloak your ip address (private vpn?) or subnetting changed after power outage
  2. Trouble connecting to Gerber Edge FX

    You may have to call roadrunner tech support and have them disable IPV6 or at least set IPV4 as the primary or dominant protocol on your network. if needed I will give you a cell number to call me often ISP’s have no idea what their changes will do to your business network
  3. Trouble connecting to Gerber Edge FX

    Start by going to network properties DISABLE IPV6 i am not quite sure what the trigger event is that started this (ISP or cable company making changes from above?) OR power off your ENTIRE network. cable modem or fios box,your router if you have one, distribution switch. leave all powered...
  4. Roland VS-540 - Only Magenta Printing test, other colors missing. (Photo Included)

    it is always possible that the fuse can test ok, when doing a continuity test, but, the 41VDC is missing are you sure one of the ribbon cables doesn't have one foil lifted and bent over touching another connector
  5. FlexiCOMPLETE is an utter piece of garbage

    THE UPDATE is not supposed to fix the issue. the point is you are on the phone with a “tech” who is simply putting your problem in a piece of HELP DESK SOFTWARE. simply a troubleshooting flow chart (IF this, THEN …) everyone has to be on the same version so the software matches your screens...
  6. Question where to get cheap tyvek banner material?

    i will check, i have never bought from fellers. thanks
  7. Question where to get cheap tyvek banner material?

    a long time client asked this weekend why we don't make tyvek banners. i looked, i think we ordered a roll of tyvek from "the plastic guy" on ebay, when we needed something for the landlord joe's question really is i think "why can't you make a tyvek banner, as cheap as the cheapest scrim...
  8. Running two Graphtec FC-9000 with one PC

    Very true. Butey have to understand a little bit about networking. usb is reliable AS LONG AS you document the naming and remain aware of it usb CAN “plug & play” and change things. HOWEVER you do it NAME THE DEVICES use a label maker. So anyone knows which device they are choosing. possibly...
  9. amazon vendors calling

    i would imagine RETURN POLICY is where it will all fall apart. and how does this work with shipping on the roughly 15% return rate? who absorbs that cost? did you discuss who will keep inventory, you or your client i have never made an amazon sale but i believe there is a penalty if you have...
  10. IC Check Slot 1 Error

    not to be devil's advocate, but, no one ever was unable to print properly because of the lack of a head rank number. you might not be able to use your existing profiles and color match a previous job perfectly, but, to tell you the truth when we put the new head in my mutoh, neither of us...
  11. the Size Changes???

    it is impressive, but remember, the algorithm records changes. there are no "deltas" in a black box. make it a gradient and see the size, or a rainbow or a color wheel
  12. Help Head Washing on S60600 Epson

    although ii almost bought one of these last week my epson experience is with older stuff you will have to google
  13. IC Check Slot 1 Error

    Did IP address of printer change?
  14. IC Check Slot 1 Error

    Sounds like something in the step in the rip is different. do you have multiple “setups” and chose the wrong one? is printhead different somehow and not allowing machine to initialize?
  15. IC Check Slot 1 Error

    If you use syringe and are not getting anything, is there resistance against the syringe? I am thinking you may have cracked one of the nipples on the manifold causing,an air leak remember the manifold is pretty fragile like one of your grandmother’s Christmas ornaments i have done this to...
  16. Help Head Washing on S60600 Epson

    on some of the older "domber" models you were able to remove the button battery and reset the date. not sure if you can do this after the machine has "decided" they are expired i am not saying you can avoid buying new ones, but i would be looking to get get old ink out and cleaner in those...
  17. Roland Versaworks 7 sucks coconuts big time!

    remember one thing, it is a 32 bit program, and can't use any memory beyond the first 4 gigs. that always becomes an issue
  18. 4 Damper Use

    so feeding 2 channels with one hose? might be a risk of ink starvation. does mimaki give you the choice of small dampers/large dampers like Roland does? I love a good workaround but would like to make it as foolproof as possible
  19. Roland Versaworks 7 sucks coconuts big time!

    Adam, i assume you do not use a slow computer... what does task manager show for resources when you are RIPing? you must have a bottle neck in CPU, RAM or DISK USAGE. unless they have the world's worse internal programming perhaps you need tio add a drive for temps and working directory? i...
Top