Search results

i have a replacement on the way

i spoke too soon, i managed to print some posters and then my next test print had no yellow. it seems to use the ink that i had manually put into the damper. so after that ink is used its not filling itself back up. Very strange.

ooooooookay so i changed the damper again and all is working fine, i could tell as soon as i put the damper into the head that it had more suction to the nip (im such a child). may have been a dodgy seal on the damper. i really appreciate you taking the time to help me pal, take care

Thanks for the reply, ill replace the cap and hope for the best!

hello!, the colour i swapped did not print in the yellow channel, the original black that missed is now not printing either. FYI it was these two channels that were swapped to test the line.

Hello All ! Machine - Mamaki cjv30-100 My black disappeared mid print which i suspected was the damper, it was late at night so i just set my head to soak overnight and when i came to change the damper in the morning my yellow had also gone. i swapped dampers on both and but only my black has...

my material is around 9 months old so it could be that

Hello All ive been running my business a for a few years printing posters/stickers and car graphics. I am currently branching out into PVC banners, I did a test print and found the print looks bit washed out compared to standard vinyl and poster paper. can you give any advice on spec switches...

Hello All ive been running my business a for a few years printing posters/stickers and car graphics. I am currently branching out into PVC banners, I did a test print and found the print looks bit washed out compared to standard vinyl and poster paper. can you give any advice on spec switches...

Hello All ive been running my business a for a few years printing posters/stickers and car graphics. I am currently branching out into PVC banners, I did a test print and found the print looks bit washed out compared to standard vinyl and poster paper. can you give any advice on spec switches...

Hello All ive been running my business a for a few years printing posters/stickers and car graphics. I am currently branching out into PVC banners, I did a test print and found the print looks bit washed out compared to standard vinyl and poster paper. can you give any advice on spec switches...

Much appreciated! fingers crossed!

It does seem to happened less frequently in uni mode but its still happening. ive cleaned the rail and encoder strip looks okay and has been checked by an engineer when he was last in. do you think its time to replace the y motor?

I have not noticed a change in sound, i have just changed my setting to uni directional instead of bi directional and the problem seems to have have stopped, any ideas why this could be? I believe this started as the head was set too low and was dragging on the wiper blade, resulting in the...

Okay! sorry for the many replies but i have just changed my setting to uni directional and the problem seems to have have stopped, any ideas why this could be?

I believe this started as the head was set too low and was dragging on the wiper blade, resulting in the wiper blade being unable to move all the way into the path of the print head. maybe this has put too much stress on the motor? could you advise where the sensor is that I would need to clean?

Thanks so much for your reply , ive carried out your instructions. FYI the CLKADJST was set at 35 when went into the setting. The Cutter carriage seemed to struggle to find its position when it first traveled back to the left but it did make it past that stage. it still gives the same error...

Hello all, I have a Mimaki CJV30-100 and im getting a message "y over current ave". It will do this in the initialising stage when the cutter carriage heads back to its position on the left. sometimes it will make it past this stage but when then when I test print or try to print the same...

Hello , did you manage to get this sorted? I am also having a similar issue, when the machine is initialising and the head moves to the left I also get the "Y over current ave" message. sometimes it manages to make it past this stage but when I go to print I get the same message "Y over...