Search results

In-house or out sourced?

Here ya go: http://seeklogo.com/jack-daniel-s-logo-74628.html :thumb:

Ok, lets put it like this: If you play the lottery your chances of winning are one in a million (or whatever), however if you don't play the lotto, your chances of winning are "0" !!!!! You have a better chance of warranty recovery if you follow the manufactures recommended installation...

Yep, I would use the cheap BLACK PLASTIC mentioned above, you could even put a few grommets along the top to aid in securing the black plastic to the top of the sign and then pull out the rope (twine) that would be running thru the grommets to reveal the new sign as the black plastic falls off...

I believe that, cause when I was in a sand storm south of Phoenix driving back to Texas, my entire windshield was pitted and had to be replaced, not to mention the paint job on the front of my Blazer! :omg:

If I am correct, your picture frame is made from the end of a ski, and the pointed end is turned up (not flat), if this is the case, I don't think you will be able to print directly on the curved wood frame. Most direct substrate to printers must maintain a specific constant distance between...

hum, I wonder what the desert dust and sand do to the surface of the digitally printed window perf that is NOT protected with laminate? I have been to Vegas, Arizona, New Mexico and the west Texas deserts, and always seam to get a light coating of fine desert sand coating my vehicle. Once I was...

Ok, if it works for you... However, I served in the military, where you have to follow certain operating procedures set forth by your superiors and I also worked for two large fortune 500 companies (Texas Instruments and Dell Computers for 20+ years), where you had to follow specific procedures...

Hey everyone, thanks for the info, I like the idea of drilling a hole and using a cotter pin, that's how my other dolly was, and it was easy to change the wheels. Now it doesn't matter if I destroy the pal-nut (push-nut) getting it off. :thankyou:

What is this called, and how do I remove it (see photo below)? I have a two wheel dolly and I need to change out the wheel/tire, however there is a retainer holding the wheel onto the 5/8" diameter axel that looks like it's press-fit onto the axel, and I'm not sure how to remove it without...

Window perf fogging in the desert: Here's a thought, don't apply the laminated window perf to the glass in a non-controlled environment, trapping moisture under the laminated window perf and allowing it to fog up later. Only apply the laminated window perf in a humidity controlled environment...

Yea, that and I can't type worth a darn. Thanks for catching the TYPO...... I hate to give someone the wrong info.....:thumb:

Oops, that was a typo, NOT 3651, I meant Orajet 3551 for the trailer! http://www.orafol.com/gp/americas/en/products/all-products-product-details/items/orajet-3551 :doh:

Hi Josh, welcome to Signs101 from another Texan (Belton).

Not having a laminator should not prevent you from applying sheet laminate, you can use the Big Squeegee to apply laminate much easier than applying a liquid. Here are two videos from two of our Sign101 members (Tim & Doug) using the Big Squeegee for laminating digital prints...

:Welcome: From Texas! Yep, you can use your new printing / cutting machine to make tons of money making slogans and logos, it doesn't take much room at all, so you can surly set it up in your home in only one room. In just a few short days you will have made so much money, you will have to...

That's neat, now I have a NEW tool for estimating, just have to get a scale and I will be set. I'll try it out on my next 45' trailer project, because I always figure my design cost separate (10% of the job), it will make it easy to come up with a price. :ROFLMAO:

I would create the different sized images (like three different sizes) of the same image without the cut lines. Then create the cut lines in Illustrator foe each specific re-zed image, that way the cut and bleed will be constant (1/8", 1/4'), or whatever you want. If you scale an image with...

Don and Steve, I saw the cover when I received my magazine, and read the article, but never put it together that it was you (CES020) here on Signs101. It was a good read and interesting to know Don started out working from home part time while serving in the military (thanks for your service)...

I agree, it would be a good idea to offer a conversion kit for all the popular eco-sol printers. Just think, you purchase the kit and follow the video instructions, everything is included, all the parts are pre-machined to fit your printer, you could even include the first batch of inks to get...