• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Vinyl Removal Tool

    Years ago I used the shop broom to remove the paper off of 4x8 sheets of plexiglass Just like that
  2. EDGE Setup issues

    That's the model I use and it has to be set to ECP
  3. Looking for the best 8" panel saw blade...

    Yes, I've used the debuting tool for years. Just wondered if there was something out there I haven't heard of
  4. Looking for the best 8" panel saw blade...

    Looking for the best 8" blade that will cut through Lusterboard ( double sided material, plywood with metal faces) smoothly. No matter what I use I always have to remove the spurs from the cut edges. Any recommendations appreciated. Not finding anything in my area.
  5. Vinyl on rubber mud flaps

    ModelMark for Hard Surfaces - Specialty - Media Looks like it might be Thermal only. But you may want to look into it further.
  6. Vinyl on rubber mud flaps

    I wonder if ModelMark could be used for this application. Haven't researched it enough to see if it is only used with thermal printing
  7. Parking lot stencils

    Thanks again!
  8. Parking lot stencils

    Thank you.... your supplier?
  9. Parking lot stencils

    normally for stencils I use .020 styrene. Have a request for parking lot number stencil and was wondering if this thickness would still work well?
  10. Punching/sprocketing machine for making my own Gerber vinyl?

    Sometimes I have taped vinyl over the hole punched vinyl not covering the holes and ran it through the edge
  11. gerber edge white on chrome printing

    I'll try that too just to see the results! Thank you!
  12. gerber edge white on chrome printing

    Darn Fred, you're going to make me have to break out my version 1.5 Omega aren't you! I'm using flexisign right now and on the spec sheet of the chrome vinyl it says use white intermediate high gloss vinyl (low temp) as the icc profile. I'm just going to have to try and see what works best...
  13. gerber edge white on chrome printing

    iv decided it's just best to use the RTape chrome and the Gerber white. If I printed the chrome I fear it wouldn't last too long. Thanks for all the suggestions
  14. gerber edge white on chrome printing

    Thanks for the quick relies. I have the material to try the above comment so I'm just going to see what it looks like before ordering the chrome and Gerber brand foils. I'll post update!
  15. gerber edge white on chrome printing

    What if I just tried 2 passes if that's possible?
  16. gerber edge white on chrome printing

    is it best to print opaque white on chrome vinyl using the gerber edge? Using flexisign program with duracoat white and its not covering solid. Tried printing it light normal and dark but prints the same. Also it might not have correct settings for type of vinyl and color. I'm using FDC and...
  17. Gerber edge chrome on clear

    Or it could be I didn't have it set up for clear vinyl because I made that switch and it's printing fine. Ugh, it's possibly the simplest things... thank you!
  18. Gerber edge chrome on clear

    Printing silver medal ( chrome) on clear. Running into a problem. In the horizontal run it prints solidbut has a few places on the bottom that are not printed. In a vertical run it started to print solid but then goes to just streaks. Heat setting? Almost sounds like a chatter when printing.
Top