Search results

i have the bar and tinsel but got side tracked and never installed it it is actually to the side near my mutoh i had forgotten all about it. i got as far as grounding the in and out conveyors and that was when my wife ended up in the hospital (18 months ago) i will finish installing all of that...

Gg any repair like this (like almost everything in real life) is done at your own risk) whichever of you people who has never f**ked up a machine in the process of trying to fix it should get a medal.

i am reaching the point that i am printing a little bit, again, after all the wife's medical problems the mutoh still gives me intermittent overspray that i blame on static electricity, IN SPITE of the fact that i mist all substrates with isopropyl, wipe dry with microfibre cloth, flip, repeat...

Sometimes grimco annoys me But they have 8 locations in Canada

I buy all my heads from solventinkjet. pricing is good.HEADS ALWAYS ARRIVE ON TIME (you don’t realize how important that is UNTIL IT DOESN’T ARRIVE) great tech support as well!

exactly if they are WET leave them in direct sun for 1-2 days OR in the warehouse under a hanging heater

probably Best to go to eBay, see who is parting out a similar mimaki. look for a power seller with multi0le listings. choose a listing, use contacts/ask seller a question. post a picture in the message do a couple of sellers CAUTION if you don’t frame it as a request to have the gear...

Great for an additional workstation

Jim Hancock will his printer run on versaworks 4? if I go to the office I will see if I have any versaworks 5. can anyone else provide a disk?

JUST A GUESS, but the firmware writes to an eprom some types are erasable & some are WORM (write once read many) unless someone is much better versed than i am, i would approach with caution.

Some of the refurbishers leave the windows installation in an odd state. I blame convoluted and confusing Microsoft rules for those odd licenses forcrefurbishers remember they did NOT allow processor I’d to be stored (so you retained your license until windows 10

it may depend on the state of the windows install after the refurbish process. I find it very odd he says it has no Ethernet adapter windows still has to create a “usb printing support” device in order to have a port to send jobs to

Ok. I answered your question without looking up your model printer. assuming it was printing with the old pc it will print with the new one (1) test the USB port you are go8ng to use. plug a flash drive into the usb you are. Going to use. does it mount the flash drive & give you a drive letter...

You can install and configure the usb Ethernet adapter without taking the cover off the computer either way you need an Ethernet cable get the adapter we will talk you through setting it up

https://www.amazon.com/USB-Ethernet-Adapter-Gigabit-Switch/dp/B09GRL3VCN/ref=sr_1_1?crid=32HYVUSEYY2XC&dib=eyJ2IjoiMSJ9.K27jUa-yk0kiU3qmPPA4XkhZZDVQ_wMsm4O9ERYM_2cz3axJVtZalJqRgdB8Rr5XgDRIfrvIMirrjrJF5lXS4eIQnFZv2_eHBNJUwawjcJx-APSRZt5_v4eL4efd77dTwshxkTkPbCRgOqV4qhNwiLHr7YkEGLy1-kwGQ5juSocddr2E1...

https://www.amazon.com/TOTOVIN-Broadcom-NetXtreme-1000Mbps-Gigabit/dp/B076HHS1WF/ref=sr_1_2_sspa?crid=1M35Y1TUO6JH9&dib=eyJ2IjoiMSJ9._nI5RiFcL6jvqR_zMoV_RE3pkmpJN2nVawiALdhgXKzIHcBtVF3weLRDBIGnXBpmffho4qTKTPRvXNvEBVhjGCio8SAugeNVp6HJnfyQqhmGJ_3NlY3Xw_0hGMd0XWBvQ_8Y7mboyE2O2noRDQmEwyJCjETJ_HHbjuHt...

you MUST have an ethernet port LOOKS LIKE A BIG TELEPHONE CONNECTOR if you bought a real oddball you can add. one for $20 or buy a USB/ETHERNET adapter for $20.

Couldn’t agree more. there is absolutely no downside to shaking the cartridges ALL of mine (Roland, Mutoh, Eason) get shaken every other day ABONUS will bevwnen you do a reprint months later & your colors are much moreconsistent

I never heard of enroute lite

that kind of repair can be an exercise in patience, but, with the price of the motor, well worth it.