Search results

Thanks for the help George

is it back lit? if so you're screwed then. Yes it is back lit If its backlit we used to just wash the white face off with glue remover,prep, and apply translucent vinyl at the sign dept of the awning company where I worked. as long as the area is white I would suggest a dark green base close to...

it is not a separate panel. it appears to be all one piece

I have been asked to quote putting new lettering on this awning. Judging from other awning in the complex, it looks like originally this large white area 40"h x 20' w was eradicated and then a large piece of vinyl was applied over the area with the new lettering cut out of it. I assume I need to...

Can anyone help identify this font? Thanks

Has anyone had any experence with this web site OnlineVisible.org? They supposedly check your visibilty on line to searches and have information on how to improve your visibility. I received an email from them and can go to their site and view a report but being the skeptic that I am, I wonder...

Thanks for all the info. some good, some not so much but thanks ! The power was off. The power is still off. All of the wiring and transformer has been removed starting with the wire from the primary to the transformer. Next time I'll "call the man" first. Thanks again

Thanks, I'll check these out.

Thanks. that is what I thought but not working with it very much I was not sure. please define GTO (newbie, you know)

I am looking for a source for dark purple or black terry cloth or similar full length robes for a swim team. Any ideas? Thanks

I'm refacing a sign for a customer and it has a couple of pieces of neon on the outside of the cabinet that need to be removed. I have removed the neon tubes but I'm not sure how to remove the wiring or can I just put wire nuts and electrical tape over them and leave it? Thanks,

That was my first thought. I'll probably go that route. In answer to Mosh's question "How big is it?" 10 ft w x about 4 ft h flat lexan

Thanks, I thought about the bottom but doing it myself, I thought it might be tougher to undo the screws while trying to hold the face in so it did not fall uncontrolled out of the frame. You know that gravity thing.

I need to remove and replace the faces in this sign. It is about 15' to the top of this sign. The top retaining clips are in several pieces. I'm thinking I should remove the top clips up to the point that is the tallest and the side retainer on the same side and I could slide the faces out and...

Thanks, I'll tell him again it is 52" or it has a seam. Take your pick.

I recently installed this floor vinyl. It is 8 ft in dia. printed on two pieces with a seam verticly. (a real pain to register). Now the building owner says he does not like the seam and wants it on one piece. The company that printed and laminated for me says this material (3M) is not made any...

It is going to be mounted on a wall at eye level in the entrey hall of the building. People just walking by will not see them. People coming up close for a good look probably will see them. The customer has not seen it, but has been a little particular on other parts of this job which included...

Yesterday I installed a printed vinyl piece 52" x 72" on to a piece of polymetal. It was laminated with 8520 matte. When I finished I discoverd I had a section with hundreds of little bubble in it. Is there any way to remove these or am I screwed? Thanks, George

Can anyone identify the script font in this logo? Thanks, George

I'm looking for someone in or near Saratogo Wyoming to install some vinyl letters on a bank door on Dec.31. Can anyone help or know someone? Thanks, George