Search results

Hi there, I bought a whole bunch of Avery HP750-626 , also called French Blue, which is SUPPOSSED to match Pantone 285C. It may not pass muster, as it is lighter than the Pantone. We'll see with the client, as us signmakers are sometimes pickier. Any of you used this as 285C? Any other...

I bought something called a t shirt ruler from Amazon, for a small project, as I usually don’t do garments. There’s a variety and cheap.

I passed up buying a real nice 6x12 ft table, still sorry I did. From what I remember, it was one piece of plywood.

I have a Pro-4000 but use it mostly for photo prints on paper. For the canvas, I use our Latex 365, I can think that the ink and material cost on this should be less. Canvas I've been using is Magic GFCVM Acid Free Poly/Cotton Inkjet Canvas Now, if someone has a tip, I'm looking for a canvas...

Love these frames, easy to use. But I'm interested in the other thing you guys are talking about, for cheaper production runs.

Can't tell you, there are far too many of these calligraphic fonts. One site that has a gazillion of them (and some cheap bundles) is https://www.creativefabrica.com/ Also, creativemarket.com

BLewis - finally cracked the code on this issue. I use Onyx PosterShop but should be kind of the same. I've had several jobs when I needed to use the full width of the material and could not, so this latest one was the charm. a) Go to Settings on the printer (the wheel) - Substrate -...

Thanks, Steenland. I found one on eBay. Let's see how this goes, seems like the seller is reputable and sent me a file as well.

Needing a copy or access to the Service Manual, as we’ll have to change a part that’s quite hidden. Thank you!

Thanks, Geneva. This had happened to me before, but in this case, I tried after the banner (that was not at the end) with adhesive almost full roll, and the same. So, now I'm looking at buying a CH955-67064 HP Latex L26500 Rewinder Motor and Gears I had a very heavy roll and I think we did...

Hi! Having an issue when loading the 365, hopefully nothing broke... Just to make sure, I tried 2 different substrates, but it's showing "Roll direction not detected. Ensure substrate is tight on the roll and entry". I have had that message before, but easily fixed by manually winding or because...

In the HP365 - adhesive vinyl, I use mainly Substance Incorporated ICON PM-2755, used to do the 3M IJ35C but found some inconsistent colors between batches. I've had lots of issues with paper medias, but otherwise most other stuff has behaved well.

Like the idea of casting to the tv, rather than have the client on top of your shoulder!

I guess similar to what ChaseO was saying. Not much excited to go through several bits, as we're not exactly next to Lowe's at this job.

The panel is 3'x10' (actually 2 of these, one on each side). We may try to see if any change trying the pick trick.

There's an idea that I didn't consider.

We're installing acm boards on top of some warped and very hard enameled steel boxes. The warp is the least of our worries as the client recognizes they are far from perfect. Tried drilling with self tappers, pre-drilling, etc. Barely a dent on that stuff. Plan B: glue them on and keep them...

Thank you for the great ideas! In this case, the job is semi outdoors. The panels face inside but in a roofed pergola type patio that is open on the sides, and with our winds here, we'll go with fasteners. Sure will have the other ideas in mind for other jobs, we have used french cleats in...

Hi, I have a project with 5 approx. 4'x8' acm vertical panels depicting a mural. Will be uv printed and laminated, and the client was kind enough to cover the studs with 1/2" exterior plywood (this is an wall that has open framing on the other exterior and not visible side) to make everything...

ASLAN SE75