Search results

search, fran or demi or gothic or got or goth & on & on be creative on your searches may also you may want to search .zip

If you print with center on the media, you have to cut with center on the media, & also do not hit get media width when it is time to cut. As mentioned above.

I have a good customer who wants a big wall graphic flourish put on the wall of one of their new start ups. It will be all white, no printing, just cut vinyl, & she wants it ASAP, like today, (I normally work Saturdays) I have to use 54" so I am limited to what I have here, would 3651-G work or...

It takes me 30 seconds per side to knock the burr off the edge after I saw cut it, also I read posts on here before you get no burrs with a fine tooth blade, but I cut my pieces so fast with the eurekazone guide I can't imagine wrestling with a utility knife.

http://eurekazone.com/products/detail/sgs.html Doug, Here is a tool you MUST have, if you get the 100 inch set up you will be able to cut any 8 foot panel as square & as neat as you want, grab 3 sections & you can go up to 12 feet long, PERFECTLY square & any substrate you can imagine, I use a...

In my case that is not true, my VP 540 cuts VERY acurate & even cuts sandblast mask, for over a year now:glasses:

Here is what I use, you need 2 sections & the saw adapter that is all, 3 sections would be nice, you can cut .040--.080 aluminum, mdo, alumalite & even foamboard & more - all perfectly straight every time- i couldn't run my shop without it! http://www.eurekazone.com/

Interesting

I quit using tape, every freekin time I print a taped roll I get nailed with some kind of marks, even if I clean it with everything under the sun, now I make strips of release liner & wrap them around the roll & staple it, I no it doesn't look neat but I am the only one who goes in the "back" so...

I had that happen in the middle of summer last year, my supplier sent it in to the manufacturer & I eventually got credited for the whole roll, also have not seen the problem since.

Some of the jobs like this are not so cut & dry to answer, if this is a steady customer & he is determined to get the face re lettered, he will find someone to do it & you could lose the customer, also it depends on how much work you have, if you charge for r&r the face with a truck, remove the...

Jill, the most important reply on this post is from isisgn, you MUST pull out enough material from the back of a friction fed plotter & let it drape down or you will cause yourself a lot of grief! I am not sure if you know to do this or not, but you should start, feel free to call me if you are...

I noticed something when I handle media, vinyl & banner material, when I only had a cutter, I would put my big paw prints all over the rolls & do what ever I wanted with them. now that I have a printer, I can't touch the rolls at all with my hands, even if i just washed them, also I used to use...

Cool post, print on!, Glad you got it fixed

same here, no problems yet

Use your heat gun & warm up the material while it cuts, you will see a big difference & it will cut like butter, not too much heat though, just warm it up, I have been doing this for 10 years & it never failed me yet.

Take your laptop with you, buy the software from them & ask for a wifi connection, load the software right there in front of them & register it, if it is ok to register, Adobe will let you know right away, if not, get your money back.

2 tricks for using silicone, 1- use 100% silicone 2-when you apply it make a series of round puddles, don;t zig zag it when installing, the round puddles will hold like crazy after they dry.

it goes away in time, if the customer questions it, just explain it to them, bubbles go away also in time, just ship it & don't worry, get your money. we see much more detail than the customer does (normally)

As far as bad prints, I went & bought every color sharpie I could find & you would be surprised what you can cover with a few color combos from those pens!