Search results

Please and Thank you!

Recently I bought a roll of Magiclee Torino 17m canvas from fellers. The roll had wrinkles so bad that I couldn't print on it without the head rubbing. Fellers exchanged it, next day, no questions asked. New roll, same problem, but not nearly as bad...

I've heard of using magnets & trimming nails, but how would you go about speeding up the process of applying trim cap to pan faced letters? I've got about 250' of trim cap to replace & this is going sssslllllooooowww:banghead: Any tips or ideas?

any help with this font? I didn't really come up with anything close. Thanks!

I stretched Clarendon & it was close but not exact. Anyone able to help?

Anyone else have this problem? I am new to solvent printing & would like to play around with some different medias before buying whole rolls. I've seen a few people mention having samples of this or that or "using up a sample of this", I however, am not having such luck. My usual...

I just got some stencil samples from Bren. A few of them require a minumum of 350g downforce. Using Flexi/Production Manager & according to the manual, I can only set the force between 30 & 200g. I've never cut anything very thick, so this is my first encounter. Put a new 60 deg. blade in &...

The file looks pretty clean, but what if I want a 3' print of it? What's the best route? Do I need this file enhanced/recreated, or whatever. I'm no good with photoshop. Anyone do this stuff? It should look like a piece of steel w/ some pitting maybe.

cant seem to find it with my usual resources something close will suffice

Well I finally got around to converting my Roland CJ 500 to Eco-Sol Max inks. It was kind of a fun project & good getting to know my machine a little more intimately :biggrin: I flushed the ink lines, replaced the pump, capping station, print heads, wiper, dampers AND added heaters...

Replacing the print heads on my cj-500. I can't figure out what this "P" looking number should be. heres the other head "15215" the old head numbers are L"15213" & R"13214" Are the 2nd numbers usually 5's? Any ideas on what to do? Just guess?

I knicked the 20 pin ribbon cable on my CJ 500. It goes from the motherboard to the operation panel. I think I repaired it, but I can't seem to get into the service mode. Not sure if this is the problem, since I haven't been in the service mode for years, but I would like to replace the cable...

I did a search & found this thread: http://www.signs101.com/forums/showthread.php?t=26152&highlight=bezier I don't know if this is the same question I have or not. When using the bezier path tool, after you make a curve, how do you re-set it so the next curve you make won't be based on the...

well not really out of business, just not print stuff. I have a Roland CJ-500 that I bought used about 3 yrs ago. I knew nothing about printing or vinyl, and after getting it I found it was kind of old equipment in the sign industry. I was talked out of converting it back then by... I can't...

My uncle is using the Transylvania Coat of Arms for his business logo. All I can find is this poor quality pic online (attachment). He has this on all of his shirts, cards, letterhead, etc. & now wants a big one on his work van. I have his vinyl lettering all layed out, but need some help...

I'm using a Roland cammjet 500 for making install patterns. Small patterns aren't a problem, but when I'm making long patterns it will eventually walk off the rollers. I've dealt with this problem for a long time & decided to ask for any tips. This particular pattern I'm trying to make is...

...well, I got nothin. Here from central, IL. Mainly in the neon/electric/service business, but venture out into vinyl & graphics a little. I think all the graphic stuff you guys do is pretty cool & might need your help here...I'll help out where I can too.