Search results

Ok I can get ink to pull through, replaced the pump, I believe this was the main issue as now captops drain quickly, after a few powerful cleans there is ink in the waste bottle. but when I run a test print.....nothing....did I blow a fuse or the board? how can I know? UPDATE: reading...

Excellent, I will reach out to solventinkjet.com to order. I was a little skeptical of the OEM captops I replaced as they looked just a little different and the manifolds were noticeably different How would I know if I have a blown fuse? would things still operate or would they cease to...

sorry for the delayed update, I have been working on different troubleshooting things while keeping this printer in production. I went to replace the dampers, again, and the other manifold tip broke off, so I replaced both manifolds now, I ordered "OEM" ones from digiprint supplies but they...

Roland SP-540i, Jetbest bulk ink system, printing mainly 3651M, dx4 heads replaced in July 2020, OEM dampers, wipers, captops being used as well I started having this weird color banding at the start of select prints, which seems to affect Yellow, Magenta, and Dark Blue the most. Green, red...

6 months in now with my used Roland sp-540i and just looking for some recommendations on routine maintenance and part replacement (yes I know it has to do a lot with how much is being printed) etc but looking for some ballpark generalities. I am printing about 400+ ft of vinyl a month (54")...

I set up a 20 pass profile at 1080x1080, with a slower head speed and it looks amazing! Take a little longer but the quality is fantastic and gives it plenty of dry time to get to the takeup reel. Thanks to everyone for the tips and tricks

Thanks for the feedback, that what I plan on doing today, running multiple tests at different pass counts, when I looked deeper into the orajet3651G profile it was 8 pass, I think it said 4 pass but bi directional so was 8, I will start creeping that up to see what effect that has as well as...

Thanks for all the feedback, looks like right now I will stay with exporting as PDF as I have tried so many, basically every, possible way to get the eps to work but it doesn't seem to matter on the production side

Its not the print time that I am worried about, right now I have to print in small batches of no more than 40-50" because I cannot let it lay all over the ground so I got the take up reel, but then this issue presented with the black not being dry by the time it got to the reel if I change to...

Yes it does have a small platen heater but it's just not enough when the black lays down so thick Appreciate all the helpful feedback and tips I do usually let everything sit overnight before applying transfer tape and packing Looks like my 2 options are either adjust the black to 100K on...

Using CorelDRAW2020 Versaworks 6.8 (now) started with 6.71 last night but updated hoping that would fix this So something weird started happening last night, when I create a new EPS file with the cut contour line (as I have done hundreds of times...maybe more) the cut line doesnt show up in...

Yeah what I thought on the fans, have a bead on a digi dri unit locally that someone is unloading, actually he has 2 of them, lightly used, asking $1500 each, they are 120V 64" I did adjust the black on the image to the roland black spot color as suggested and that made the difference for this...

Thanks for the feedback and advice, I was looking at a dryer, I might try a homemade version before opting to spend some extra cash on a purpose built one for homemade just using a box fan or 2 behind the media? or doing anything to provide heat? The printer profile setting for 3651G is max...

I just installed a take up reel system as jobs have started to get larger than 30-40" in size, ran my first long run of about 12' of orajet 3651G, printed on Roland sp-540i, using the oracal orajet 3651G profile in versaworks 6, using jetbest ink ecosol bulk system. When it "unwound" itself...

I appreciate the feedback, thank you, I will look into a laminator

I am using the 3651G profile, that was a typo

I have a roland SP540i, using orajet 3651G and liquicolor inks. I am using the oracal 651G profile in versaworks and the MAXimpact color profile I am having an issue when I print and cut decals for cell phones that the ink rubs off the decal in a few days of use. I know I can laminate and...

You are correct, got out the service manual and ran through the physical head adjustment in service mode, all fixed, thanks for the help

New to this a few months now, learning a lot but have a weird thing happening, where it seems that some prints have a magenta line showing up around them, not all the way around but part of it or the edges of some prints don't look crisp. I have done the bi directional detail adjustment and...