• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Printing seems Grainy

    Ran through a detailed bi directional adjustment. now printing at high quality seems to get rid of the grainy look. I’ll load a couple pictures
  2. Printing seems Grainy

    New to large format/solvent printing. I have a Roland SP540i running Liquecolor inks in a 440ml cartridge printing on Oracal 3651 gloss I read some posts and adjusted print temp to 108 and dry temp to 110 Lighter colors seem to come out grainy, darker seem ok if I print at high quality, also...
  3. Broken Manifold on new head

    Ok thanks for all the advice and tips, I was able to finally get it to pull ink to the head. I swabbed the "pins" that go into the ink cartridge with cleaner. Put the cartridges back in and used a syringe to pull from the line after removing it from the damper. nothing, I then tried removing...
  4. Broken Manifold on new head

    ok I was able to get some precision pliers and With some patience was able to remove the screws. Cleaned old manifold and put it all back together. Reinstalled still can’t get ink to the head. Even tried pulling with a syringe at the tube going into the damper. Any other ideas?
  5. Broken Manifold on new head

    First Post, Newbie Just acquired my first roland printer/cutter SP-540i; used; the previous owner had replaced pump, heads, dampers, captops etc as he was planning to put It into long term storage but ended up selling it. During the initial setup, no ink would flow to the print heads or...
Top