Search results

Also notice the waste pipe, there appears to be air in there or something, shouldn't it be full of ink without any gaps?

Can someone confirm that the spitbox is the thing with the replaceable sponge? If so it's the spit box that is filling up and over flowing, not the capping station.

I'm having the same problem with my mutoh except with black instead. I've already looked and both black dampers are full of ink and there are no air bubbles or blockages in the lines. can you give a step by step guide of how to do what you suggested, or maybe a link to a tech manual that...

Sorry, I've resized them now. Try looking again.

Here is a picture of what I think is now the spitting box and not the capping station, its the first thing you see to the right of the print area and beneith it it has a large pipe, shown in the next picture Here is a view from below, the 1st pipe leads to what i think is the spitting box...

Congratulations on your install! I'm curious as to the "flatbed market". I have one large client that regularly orders hundreds of boards from us and they all have different artworks, they strongly rejected the idea of direct to substrate as they reuse the boards. So they prefer us to apply...

I'd be happy to provide more details. I'm off to the workshop now so I'll take pictures to describe the issue in more detail.

I'm having problem with dropouts and grey blacks that should be black. On performing a nozzle check I've noticed that the entire 1st black block is missing from the nozzle check. What would be the course of action to take, if possible could you leave an explanation on how to do it? I did...

The waste tank on my Valujet is no longer filling up. Recently the small box with the pad on it (capping station?) overflowed with ink and this spilt onto the print, since then I have been monitoring and extracting the ink with a syringe. Is there any way to fix this and get the waste system...

Many thanks for your reply Ryan, I will try that today and let the forum know if it works!

Hi, Mutoh Valuejet 1604 using bulk ink catridges (jetbest ink) The magenta was left to run far too low and now we are greeted with SubTank Refill everytime we try to print a job. I was told that the cause is more than likely air in the system and that I should syringe the ink through...

are there any guides on the internet, i have the same prob but dont fancy paying the extortionate call out charge.

all sorted, I unplugged the machine for 10 minutes

Hi, Yesterday I had the ink not original message so i took the catridge out, put it back in, that didn't help so i switched off the printer. I then tried to switch the machine back on but nothing happened, I've checked all of the power cables and they are ok. Is this a known issue and...