Search results

Check if you printhead is not scratched. have you got a paper jam? Generaly, when a printhead print out the range like it does on your print test, the head is damaged and it's difficult to recover. where are you located?

I think Mike Paul is right. sometime Is deu to the Queue A or B parameters.

Hello guys, I need your help. I have changed A DX5 printhead on a CJV30 Mimaki printer. Before to change the print head, the Cyan was very poor and It looked like a spray. I have change the Head and the Print test is quite good! the print test is here...

Screws to change the manifold is begind the si you have to take it off and make thé alignement alter replaçons the head. Take care to the joint beetwen the head and the manifold!

Hi, Where are you located? I'have got a good contact in Europe. Let me know if you are interested in!

I'm looking for 2 service manuals. Mutoh valuejet 1614 and Roland VS serie. Could you help me to find them. I would really appréciante your help! Thanks in advance Romain

try to print by using Prepress EUROPE parameter, then clic on properties and choose Perceptif.

or print with unidirectional option

I don't like this ink. to much solvent in it.but this is not the matter I think. could you send a picture of your problem

before to change a printhead you have to switch off the printer, take off the power cable and push on the power button several times to discharge the machine (especially capacitors). in some cases you can damage electronic board. you can check some sensors and see if a board is damage. Enter in...

Bonjour ;O) Thanks for your help and your advices...!!!!!!!!!! I will try to find a solution with that Romain

sorry to reply so late but you need xp and versa works don't work. you need another software. if you need it let me know.

this is not clear on the picture. that's why i have post a scheme, but in reality we can see it easily. http://www.imagup.com/data/1154109344.html

I think I know what is your problem. Sorry for my english but I french. on the left slide of the carriage, around the bar on which slide the carriage, there is a kind of join attached with 2 screws on the carriage. this kind of join avoid the dust to come in the bearing of the carriage. when...

Hello guys, I'm french and I need some help about banding. I don't know if it's the correct word I have banding on a VP 540i. This kind of banding looks like a lighter band and this phenomenous is completely hazardous. sometimes that's happening just after several inch (about 10). see the...

post a picture and i will help you! note on the picture the feed and the scan direction

Hey guys, I'm really happy to find this forum. you look like really great! you seem very involved and I thank you for all the information I could already find here. I'm new here I'm in France and I can tell you that there is no equivalent here. So thank you again for this job. I have a...