Search results

Try here > > http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=82223&prodTypeId=18972&prodSeriesId=82218&swLang=8&taskId=135&swEnvOID=228#1130

I have the 5500ps hooked up tcp/ip through ethernet. Pretty sure you will want to hook it up this way.....it rips and prints much faster. You do need a different driver. It's been several years since I installed mine, but I remember having a driver installed with minimal settings like you...

I have the same "prinhead path" error. In my case, it's the belt that drives the head back and forth. It is deteriorating and pieces of it fall into the path and the carriage drags on them. So...my machine needs a new belt. I've seen belts on e-bay for about $40 with instructions. You...

I had a bad cable once that caused similar problems...if you have an extra you might try one.

I have a 5500uvps, and went through this a few years ago. That printer just can't print on the right media for a full vehicle wrap. You may be able to wrap a box trailer or a fridge, and get it to last 3 years or so. I don't think you'll have much or any luck with a full vehicle wrap. Even...

Same as Kustom here, I never got the low temp error before but I have got the heater voltage error. The shop was cold, and when I turned the office heat up it started like normal. It was like the cold room "freaked" the printer out.

There are a lot of adhesive back vinyls that will work with the HP rated for 6 months to a year, but 3m makes the only 3 year rated vinyl that I ever found, and you have to laminate with their laminate. We would leave about a quarter inch of laminate around the print to encapsulate it to the...

I have LXI 6.6 v1 and have used it with a couple versions of Corel. Copy and paste works..but "sometimes" the image pastes in with jagged edges. I have found that saving the vector from Corel as an AI version 1.1 imports into LXI perfectly every time. Just remove all the gradients and make...

Chopper...something similar happened to me a few weeks ago. It printed ok, but wouldn't come off the backing paper. Come to find out, they sent me the wrong material. ( think it was for a thermal resin printer ) Might not be your problem, but make sure you got the CPS2160 material.