Search results

But is 3 in 1 a good enough grade?

Does anyone know what oil to use on the rails inside the printer? hP gives you one oiled cloth p/n CQ114-60188 but when you call HP they don't know what your talking about. Thanks for any help.

Awesome! Well then I havnt been starting up those lamps at full power then.

Thanks alot!

Does anyone know how long a banner would typically last outdoors printed off the HP fb700? Does it need to be laminated since its uv ink?

​thank you so much that was valuable information. I tell your an operator!

Also I've never seen a printer that cleans itself as much as these FB5/700s do. It's good they clean themselves but man it's everytime you go to touch a button it jumps into cleaning mode. And it doesn't matter how much you print either I don't care what the salesman or installer says. They're...

Anyone have any thoughts on the onset printer? I don't know much about it. Problems with it? Does it work? Lol. Is it old technology? DOes it have value? thanks for any input.

Shorten your bleed and clean the belt from time to time. Also this printer doesn't do well with thin materials good luck.

You won't get a rich red on that machine period. We use caldera rip and get the same dull red results. Our profiles are perfect and we get rich reds on other machines except that one. The problem is on the HP side somewhere.

Make sure there is no ink clogging up the perforations on the belt. Adjust the head height up .125 is max. Other than that There is not much you can do unless you use that warped media mode which will burn the first 12" of material. If you can allow for that it works. But this printer just...

sorry it took so long. The NMP chemical did nothing for the Spectra heads. The amount of time it took for the process didn't help either we got busy printing on the HP. We're sitting with 24 bad heads. It was worth a shot anyway. @eforer Can you tell me how to flash the firmware? Thanks.

We have the HP FB700 as well. We have not used the white yet as well. We decided that the white needs to be profiled like the rest of the print modes. But we won't do this till a big job comes up for white. Because of the ink waste involved in the switch out. You have to decide what your minimum...

I print tons of styrene on the Gandi 3150x2 and the HP FB700. On the Gandi we use Sericol/Fujifilm Ink. And the Hp whatever their standard OEM ink is. No problems at all for 2 years. If you have ink problems try the Uvjet adhesion master but its a pain to have to wipe every sheet. But all...

Xrite Color Profiler + Caldera Rip = problem solved. PM for further details.

Should know something this week.

I think your right. I'll try that. If the laminate sunk in when applied that would show squeegee marks. I think:thankyou:

I have window graphics and they look like they have wet streaks in them. After applying them with a felt squeegee. How can I minimize the wet streaks in vinyl. Its clearvue window graphics that have been laminated.

Would you say that you don't buy print heads that often using this chemical?

We injected NMP today with a syringe into 24 heads. Each head twice. Then we came back to the first head we did and tried it again. We didn't notice anything special so we decided to let them sit till tomorrow and try again. Keep in mind these are SE 128 spectra heads. They have nano size jets...