Search results

I kinda like the idea of Ski Sign except go with a 2" square galvanized tubing or just plain steel (no galvanizing ) if you are going to paint it. get some 1 1/2 flat bar and have them welded as a cross (2 pieces) This would allow easy bolt up of sign and it would be no warpage and would last...

Thank you for your help, I will have to keep it in mind when I am trying to cut the bigger stuff. Appreciate your help. Paul

I am just cutting a 15 inch roll but I cannot get it to cut between the rollers ,, the left side still has usable material left and the right side does not cut the bottom of my vinyl. Like has no room but it does.

Hello ,,I have a Roland Camm-1 (24 inch) Roland Plotter Cutter and I was wanting to know if anyone would know why it does not cut in between the rollers? On my left roller it will cut below where the edge of the roller is and on the right roller it will not cut all the way to where the roller...

Hello, I was wanting to know if it is ok to put 1 shot paint ON kILZ LATEX PRIMER? I have already primed 2 pieces of plywood with the kilz latex primer and did not know I would end up using 1 Shot. I have heard it is ok and I have heard that it is not ok. Don't know what to do Thank you for any...

Thank you Tikiboyz I Think that is it. Sure looks like it to me. I don't know how you guys do that. Thanks again,, Paul

Hello,, I cannot find this font or anything really that close to it. Does anyone hear have a suggestion? Thank you very much. Paul

What thickness of aluminum would you use and would you paint the aluminum? Thanks ,, Paul

Ok you guys have talked me in to it. If I go with aluminum overlay, how would you mount it to the plywood? Wouldn't it have buckles in it? Now the MDO board , I don't know,,,, for one thing I need 16 ft x 3ft & I have a feeling that that will be a lot of cost. But I don't know so I am still...

I am doing a sign where I have to remove 2 eight foot pieces of plywood, remove the vinyl letters that are about 12 years old and peeling like crazy. Then I am going to prime it and then paint it. After I paint it, I don't know how long to wait before applying vinyl. Any suggestions? Thanks,Paul

Hello , I need to know if there is a vinyl that will withstand 150 degrees and it will go on an open tank that has citrus acid in it. they heat the citrus acid up to 150 to clean copper headers with. during the weekend, it will be shut down and then started back up the next week. I need...

Hello I just wanted to know if it is ok to place vinyl over those rear defrost lines in automobiles? Will it hurt the vinyl? Thanks for any advice. Paul

Thanks so much for everyones help. Now I know what I am dealing with. Paul

Hello ,,, I was putting some vinyl lettering on a trailer the other day and when I peeled off the application tape, the paint came off with it. I asked the man about the paint and he said it had been painted 2 weeks ago. My question is how long should you wait before applying vinyl to a new...

Also do you know how to do the yellow around it? I tried contour but can't seem to get it to work any help appreciated

Thanks so much for your help. Do you know the best place to buy this font at a reasonable price. I only need it for one job. Paul

does anybody know what this font is? Thanks you,Paul

Do I need to size my picture before uploading it? I cannot seem to get my pic to upload. Paul

I seem to have a similiar problem also. But I always send my graphic straight to the cutter from Corel. Or does it filter through cut studio without me knowing it. Maybe cut studio and Corel need to be configured so they work together. (just guessing)

I exported the file as an eps file and then imported it in cut studio but I just got the frame I had around the heading and just the underline of about 8 words but no text was imported. Just about ready to give up..