Search results

The reason I ask is that there are scenarios where the wallpaper may not be permanent, and slicing the wall could prove to be a problem in those cases. It sounds like testing to get the pressure correct is the preferred course of action.

How do you avoid accidentally cutting into the wall surface (drywall or similar) when performing the cut through both layers?

The only periodic lubrication maintenance that Graphtec recommends is on the carriage. The z-axis (pen up/ down) spring-loaded actuator should be cleaned and lubricated periodically to ensure that it does not stick. It is located behind the plastic carriage cover that can be removed with two...

Paulica: Thank you for sharing your experiences with your Epson Surecolor S30670 printer.

That functionality is accessed via the EWS (Embedded Web Server) on both machines.

Re the CM3 issue: I am guessing that there is a discrepancy between the step size in GPGL between the CM3 software and the GPGL value set in plotter's firmware. If the plotter were set to a step value of 1016/in and the software to 256/in, this would account for the 1/4 scaling issue that you...

You da Man...

Calling George Costanza...

There are many possible things that could be going on here with attempting to match PMS colors on your printer. It is probably not a gamut clipping issue, as the color in question is a neutral. In summary, here is what needs to happen for the Pantone Library in the latest version of Versaworks...

Is this on L25500 or L26500? There can sometimes be issues with printheads overheating and causing both nozzle dropouts and color shifts. This is more prone to happening on large multi-tile jobs. It can help to use gutters, and to print multi-tile jobs as separate jobs to give the heads more of...

www.wsdisplay.com www.texvisions.com www.theflagzone.com

Are those caused by the print carriage impacting the media, or from the use of the dancer take-up take-up system? Assuming that a print head crash is the source, I would look at the humidity of your print room. This time of year it is common for humidity to fall below the minimum (25%) and this...

link no workee

The ink system is pressurized while printing. Be sure to drill into the Ink Menu > Replace Ink Cart on the control panel before replacing the cart. This will depressurize the carts and allow them to be replaced far more easily.

Nylon is commonly used for flags (state, federal etc). It offers durability and high ink penetration (pass-through) to get the ink on both sides of the nylon. Digital printing on nylon (uncoated) can only be done with the proper ink (dye-based acid ink). This requires a printer that is dedicated...

Here you go: http://www.hooksandlattice.com/signage.html

Without a signal amplifier, the maximum USB 2 cable length should not exceed around 20 feet (not to exceed 5m/ 16 feet per the spec).

Static cling will not adhere to drywall, only to non ferrous metals and glass surfaces.

There are copper contacts on the back of the cartridge which can get dirty. Sometimes cleaning them (with a clean eraser like on a pencil) will clean the contacts and allow the cartridge to seat. Worth a try before calling HP support...

Onyx version 10 does with specific Summa plotters.