Search results

+1 This is precisely what HP has done on the L26500, using thin film and magnets.

If you are looking for a single piece of fabric (where the ink is penetrating through to both sides), I would look into the Aberdeen 2812 Flag material. I have successfully printed on this with the HP L26500, and while the fabric is a very open weave (needed to obtain the ink penetration), it...

Onyx does charge for technical support, though I don't know whether or not they will support version 7, as the newer version 10 has been out for a while. Did you happen to change the computer's operating system? I doubt that Onyx version 7 will run properly under Windows 7...

It sounds like the program is configured for a basic Onyx product, called RIP-Queue. The additional modules are not available for use with that product. In Onyx, go to the File Menu > View > Key. This should open the Onyx Key Viewer, which shows which modules are enabled and disabled for your...

It is entirely understandable that we all want to feel good about our purchase decisions, and attempt to sway others in the same direction. I would agree that both printers are very capable of producing comparable print quality. In my opinion, the HP approach (using on-board systems like OMAS...

More like < 3 to 5 minutes for virtually all media products.

This quote is from ____________ ?

Has anyone here purchased an L26500 for < $18,000 (sans RIP)?

http://www.everprint.com/online/simDetail.aspx?partno=CH955-67096&l=en-us These guys show 5 in stock on their site, but you probably would want to verify this.

Linear Encoder strip or sensor needs to be cleaned/ replaced.

There is no way to predict the reaction between sol ink and uncoated cellulose paper. In my experience, it has never produced satisfactory results. Your results may vary.

Typically, there is no chemical reaction that occurs between solvents (or 'eco' solvents) and natural fibers like cellulose paper. I would expect the ink to wick into the paper, similar to a sponge, and color will be very fuzzy and muted. I would be shocked if this combination (ink + media)...

FlexiSIGN 8.5 and higher is compatible with Windows 7 (32 and 64-bit).

The 'best' media profiles are those that are built on your own machine, by knowledgable operators. Barring that, the next 'best' option are canned profiles that you download from various sources (RIP and media manufacturers etc), and are built for your specific printer model, RIP...

Captops have been known to swell, and cause contact with the printhead nozzle plate, This can cause a siphoning of the ink into the waste tank, and overflow it. It has been a fairly rare issue with the Roland printers (more common with the old Mutoh Falcon Outdoor). Solution is to regularly...

+ 1

FlexiSIGN-PRO has something similar, although the name escapes me at the moment (Custom Color Mapping maybe?). It is located in the Production Manager, under the Setup pull-down menu as I recall...

Look into the Perf Cut function in the Versaworks help system. Using it will chew up your cutting protection strip though...

ES-1000 is an EFI OEM version of the EyeOne. I am not sure what Gretag Macbeth/ XRite software, if any, is enabled in the dongle of the OEM versions.

Just tested the i1Pro2 with PM5 - is a no go.