Search results

On the L25500 the ink configuration in the heads is Cc x2 Mm x2 KY x2 There are a total of 6 printheads.

If Onyx CutServer has a driver listed for the specific cutter model that you are using, it does not matter if the cutter has an optical sensor or not.

There is no reason in the world to include FlexiSIGN in this workflow, assuming you are designing in Illustrator/ Photoshop. Create the gradient in Photoshop, bring it into Illustrator and add the type objects and cut paths, and save an EPS or PDF that is then brought into Versaworks where it is...

+1

The pen (tool) up height is fixed, ther is no adjustment on that plotter. If the problem is caused by paper curl, there is a fan speed adjustment to suck the paper done more aggressively.

GraphixDirect is now the master distributor for the Flora 2512UV printer.

The UV Cut version includes a filter that cuts off Optical Brighteners that can be present in some media products. In my opinion, it is not necessary, but there can be some disagreement on this. It is also possible for the ICC profiling software to perform the OB cutoff.

I am not familiar with the print media, aside from what my previous post contained.

I have a customer who is reporting an odd problem with her 50/50 window perf film. I have attached a photo of what they are seeing. Essentially, it is an inconsistent and irregular pattern in what should be a solid color. When they printed and laminated, everything looked fine. After 1-2 weeks...

Is the new firmware version 4.0.0.4?

Configure the measurement device as an 'i1 Strip' in only to be able to read rows of patches at a time.

I am dying to see pictures of this...MacGyver taken to a whole new level.

First guess is that you are experiencing nozzle performance problems with your Cyan or Yellow. Run a nozzle test print and assess it. If by Red you really mean tinted toward red, that is a color management issue, where your profile is not achieving neutrality in the gray range where you are...

Your version of the i1Pro Spectrophotometer should be supported by Onyx and i1Share. Either of those programs should allow you to take a spot measurement and define the color in LAB color space. Once you've got the LAB value, you can create a swatch of that color in Illustrator, Photoshop...

Epson DX2 (solvent version)

No, it is the same in x10

Insignia is right-on. You need to switch into RIP-Queue, and click the Change button at the right. In the resulting dialog, change to the media that you are profiling in Media Manager. After clicking the OK button the job should RIP and print (if Automatic in enabled, or you need to click Send...

In my estimation, you shouldn't, not when obtaining the proper Graphtec knife and holder is a nominal expense (Graphtec CB09 knife and holder runs less than $100).

The X-Rite Color Munki does a good job of monitor and desktop printer profiling, and is very user-friendly. If you are running a large-format printer that is driven from a software RIP, be sure that the RIP will communicate with the device. I don't know of any RIPs that support that unit, but...

Cutting Master requires that the language setting for the Graphtec be set to GPGL (Graphtec Plotter Graphics Language). This is done via the control panel on the plotter itself.