Search results

So I have been having another issue about missing half a head and while working on this issue I noticed a huge amount of ink everywhere around the capping station. On all the surfaces around it, and a lot of it. There is usually some light mist that I can easily wipe off when I do weekly...

So I have a Roland xc-540 and it doesn't get used a ton but does gets used and I do keep up on maintenance. I hadn't been used in a few weeks and went to run a print and the test print showed the whole left side of the cyan print head was missing. There wasn't any ink what so ever on that...

I have a Roland xc-540, and I am getting a color change in this blue on the last panel. The whole thing is ran at once, but the blue hue changes a little bit. It is the last panel on the run.

So I am trying to recreate a vehicle graphic for a guy and have the design down but can’t get us to print clean enough. I am printing on a Roland xc-540 with Gerber metallic cast vinyl with the generic cast vinyl profile selected for the print below. I have tried different profiles but they...

So I’m trying to recreate a old car graphic and need to print a black design on some scotchcal 3m marking film. My first run went pretty good except I have some black banding which I haven’t got before, printing on white vinyl. Any suggestions? Sent from my iPhone using Tapatalk

This print head has been kinda week since we got the machine. Now this is where it is at. I have tried cleanings and a head soak ( maybe 20mins). Is this just at the point of needing to be replaced? Sent from my iPhone using Tapatalk

So I have a fc8000 and have had it for many years now and the media rollers are extremely hard to slide back and forth. I have taken them all apart and cleaned and lubricanted to the best of my ability and they get a little better but nothing like they should be. Anyone have any suggestions on...

So I have a sign warehouse q42 and have cutting master 4 with illustrator. I’m trying to cut some decals I printed from my Roland xc-540 on it but every time I go to cut, it tries to read the first mark and fails and asked if I want to cancel or retry. I know the marks are good and the arms is...

Sent from my iPhone using Tapatalk

So I have a job that I need to print that is a black and grey camo print. Well it keeps coming out greenish or brownish. I have looked and looked and lots of tips but non seem to be a resolution to my issue. So here is Roland spot color from their color chart. The black is nice and the grey...

Well as the title says…here is a pic. I do regular cleaning and maintain. I don’t not print a lot on this machine. Sent from my iPhone using Tapatalk

My printer just started doing this and is making a weird noise from the cutting head of the printer. Sent from my iPhone using Tapatalk

I have a Roland xd-540 and I made some small stickers in illustrator and they are suppose to be just black and white but they have a green hue instead of shades of grey. Sent from my iPhone using Tapatalk

So I have a vinyl express plotter from sign warehouse which is just a rebranded graphtec. Well the glides that the pinch rollers slide on have wore out but signwarehouse won’t sell me replacement parts unless a tech comes out. The plotter is almost 8 years old. Anyone know where I can get the...

So I don’t really know how to explain this but I got a picture. I am not printing to the edge of the media, I have a 1 - 1 1/4 boarder. This is on both sides of the printer. Sent from my iPhone using Tapatalk

So everything has what I call overspray around everything. Is this normal, old heads, just how it is? Sent from my iPhone using Tapatalk

So my prints have what I would call overspray around everything. Is this a sign of old head or is there an adjustment that I can make or is this just how it is? Sent from my iPhone using Tapatalk

So we have two vinyl express q42 plotters. The one that is older, it is very hard to slide the pinch rollers unless you have your finger direct under the hole where the pinch roller slides. Anyway to fix this or do I just have to buy new ones? Our other one slide wonderfully. Sent from my...

So first post on here. The company I work for bought a printer used and I have been doing my best to keep it going. At this point we don’t do very much printing with it. I keep up on cleaning and if we don’t print anything for awhile I run something through just so it is putting down some ink...