Search results

As the title suggests, I need a grand format printer that can (more importantly) laminate our prints or create new ones and laminate those. There are only two prints but the size is 61"x145". Our laminator will cover 61" exactly but if it goes slightly off, I will be reprinting. Probably easier...

Help with the attached font

Can anyone help name this font? Thank you!

Thanks!

Can anyone tell me how to get into the service mode of my Roland SP-300V? I need to change the ink type from Eco-SOL 4 color to Eco-SOL Max 4 color. I've tried the old way but it says the machine is protected. Thanks in advance.

Can anyone tell me how I can change the ink type setting in Versaworks under Printer Settings? The profiles I have downloaded are for Eco-Sol Max ink (which is what I use) and when I try to set up a new printer and verify the machine, it chooses regular Eco-Sol ink and won't let me change it to...

Does anyone know anywhere I can find a matte finish "realistic looking" carbon fiber film? I've tried a few places but had no luck. I am pretty sure I have seen it somewhere but I can't find it now. I almost to the point of just printing it and laminating it with matte lam but that kind of takes...

I had a customer order a custom printed pan face. I was told the measurements were 48"x96" so I ordered the pans at that size and printed the graphics, installed them and sent them on their way. Well it turns out that they bought a very used custom box sign for $50 and just needed to replace the...

I am in the need of at least a 4' tall (cheap) easel that can be used for a coroplast sign that is contour cut out. Does anyone know where I can find them?

Hello. I am thinking of buying a new computer. Specs are 3.4 Intel i7 3770, 240GB SSD Drive, 1 TB 7200 Drive, 2GB AMD 7770 DDR5, 24 GB 1600 MHz Ram, etc. Anyways, I have the option to get Windows 8 Pro, Windows 7 Pro, or Windows 7 Ultimate. Which should I get? Here's my dilemma. Currently I...

Hello. Here is my dilemma. I have a Mimaki JV33-160 and Roland SP300-V. I am wanting to print vinyl on my Mimaki but have my Roland contour cut the vinyl, if needed. How can I do this? I currently use Rasterlink Pro 5 SG with the Mimaki for printing and Flexisign 8.1 with the Roland. I see that...

Hello. Two days after my Mimaki JV33-160 printer was installed, my computer crashed and unfortunately I did not have a recent backup with all the Rasterlink software, drivers and profiles installed so I ended up reinstalling everything myself. I have everything working again but now when I open...

Does anyone know of or where I can find templates to wrap the faces and backs of guitars/basses? They will not be complete wraps just the faces. Just looking for the contoured shapes. Don't need all the holes and bridge cut out already, will do that by hand. Thanks.

Hello. I have a customer that is wanting to wrap his 2012 BMW motorcycle gas tank. I don't know if you guys have seen this kind of tank but it doesn't look like your typical Harley tank. Has anyone been able to successfully wrap one of these tanks? If so, can you give me some tips? :peace!:

Does anyone here print directly on Lexan? If so, can you print on sheets that are 6'x12' or 8'x12'? The print will need to be translucent as well. I don't know if it works out well using a flat bed or not. Can anyone help me out?

I am looking for a company that can print me a single piece of 12'x6' translucent print with lamination. I want the double strike printing if possible. The size could also be as big as 12'x8' but needs to be a single piece even at that size. I would prefer a company that can print the lexan...

Anyone else having problems accessing the website signs2trade.com? I was able to place an order earlier but now I can't access the website at all. I tried different browsers and computers but still no luck. Can someone let the owner know? Thanks

All of sudden when I send a print through the rip, the printer gets ready to print, but ends up feeding material through like crazy and never prints. I tried restarting the computer, turned the printer off and back on, but no fix. Not sure what to do. The weird thing is I can't print certain...

I was thinking of buying the above printer but does anyone on here actually own one? If so, can you give me some honest feedback? What do you like about it, and dislike about it? I currently own a 4 year old SP-300V and I have loved the printer except for the fact that I can't print more than...

Can anyone tell me what the power consumption use is for the Roland SP-300V? I need the power consumption number for sleep mode, machine being on but not in use and the machine printing. Thank You.