Search results

im getting some banding one some colors with a new (used) jv33. it seems it makes 3 passes then quickly stops at the capping station and im guessing fires some ink into the caps. i think this is where banding happens as it is very consistent. is that slight pause causing it and can i disable it?

i got a file i cant touch in a editor, so i must add bleeds in wasatch. i need no left bleed, and 1" right, top and bottom bleed. anyone have a solution for this? ive messed around in the setup box and got the side bleeds to show, and have the layout spacing to 2", however there is no cutline to...

what is needed to do to the machine for this conversion? full line, damper and head flush? my boss said the triangle tech told him to just switch the cartridges and let the ink flush the lines but that just doesnt sound right to me, let alone the colors mixing and never being able to match them...

im having cyan overspray on a head. ive done all possible cleanings and they dont help. it goes away mostly if i print, but thats creates a lot of waste. heres the odd part, when i do a test draw where i spot replaced cyan with 100% cyan, i get no overspray. the only times i get the overspray is...

so i am doing the manual slant adjustment with the screws and get the test draw to show the magneta and cyan lining up vertically and from what i can tell on top of each others dots. however, to the sides of the slant test draw strip to the right the magenta staggers off and the cyan staggers...

on the bottom of the jv5 capping station are 2 hose connectors that go to 2 separate pumps. 1 is for the ink pumps and 1 is for the cleaning pumps. does the cleaning pump refer to the cleaning cartridge?

im having inconsistent cyan dropout on my hp 10000s. right now its been dropping out around 10' into a 12' banner, sometimes i make it through ok. after every banner i do a wash printhead for 5 minutes and then a normal cleaning. the iq test always looks perfect afterwards, but then may dropout...

just got a brand new jv5 straight from mimaki. also got all new dampers and data cable. the capping station was replaced recently. we got all the color except the right yellow. nothing seems to work to get it working. ink fills, cleanings, nozzle washes, waste line pulling will occassionally...

im having colors dropout on my jv5. its often only 1 of the pair from a single head. its not something where you start to see the colors breaking up, its very sudden. ink fills, nozzle washes, cleanings, and wiper exchanges do nothing. the only thing that works is detaching the pump and...

anyone have any tips on how to clean the underside of a hp10000s carriage? i have some stuff hanging which i think it catching the sliders

can someone explain the wash printheads cleaning? the manual just says it soaks the nozzles in the ink for 1-2 hours. is it like a jv5 where u set the time and theres a countdown? or do i simply execute the menu option and leave it for a couple hours?

i have a jv5-160s that is being a pita. every morning i gotta do the pg adjust and drop pos adjustments to get good test draws and accurate prints. after i get them dialed in they are fine for a whole day of printing. but when i come in the next day they have to be re-adjusted. the number...

so 2 problems happening, not sure if theyre related sometimes when i do a test draw there are major parts missing, sometimes half to a whole color head, usually magenta. also sometimes the magenta bleeds with the other colors so i do a cleaning or ink fill. then sometimes when i do this i...

howdy folks, im new here. actually new to the banner industry. been in training for a week and now running the solvent printing area by myself for 2 weeks. troubleshooting has been fun! im in charge of a 2 jv3s (currently in pieces, not my fault) hp10000, and a jv5 that im fooling with now. ive...