I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
came into shop today and saw that my printer was leaving banding....new printhead only 1 week old so i did the usual cleanings and soak and still missing alot of them.....its also leaving ink as it is moving back and forth over the edge holder for material as well as almost like its got...
Have a 55" royal sovereign cold lam and need to find a tech or someone local to come recheck over machine. It isn't tracking and is puckering badly almost every time. The rollers are in excellent shape and it is well takeen care of but we recently laminated a 16' piece fine then proceeded to...
We are trying to cut an oversize image in flexi with contour. We print with registaration marks normally in Versaworks then contour in Flexi. Issue we are having is im not quite sure how to cut an image with contour that is roughly 74" by 80". Any help is greatly appreciated
Signs 101 Network RegistryIn what country are you located? United States In what state or province are you located? Ohio In what city or town are you located? Tiffin What large city is nearest you? Findlay - Columbus Check all items that apply to your listingInstallations (Basic, no...
With reading a post on someone's logo today I though I would start a post showing members of Signs 101 logos. This isn't here to complain and bicker just to see what kind of logos everyone has. Below is mine and though some of you may like it, some of you will absolutely hate it and think its...
I know I have mentioned this on here before but after looking through tons of forums I still cannot figure out this tracking issue on my Roland Versacamm VP 540I. I have attatched pictures of simple text with a .25 contour on the image. The carriage cable is great, we have a brand new blade on...
I don't know about most the members on here but in NW Ohio we are at -38 below with wind chill. Non the less I along with 2 other businesses in about a mile stretch of 30 shops are open. I guess I'm just wondering if anybody else has this nightmare of weather?
On the bright side I can clean...
Hey guys I currently have a Roland VP-540i & love it but as posted before on here after cut calibration and everything its pretty awful for what I do. I tend to do bigger print and cut stickers (3' x 6') and large run of small stickers like (3" x 3") 500 at a time and it the 540i just isn't up...
Wondering I read a post from 1 guy on here saying he is using this material and I was just wondering if anyone else has tried this? I went to their site and its fishy I can't find a phone number or anything or where they are from and that concerns me. Then I see the pricing and it is cheap...
Okay guys so I've written a couple posts on here about my Roland and for the most part got anything needing fixed taken care of and fantastic. Problem I am having is still the Versacamm VP 540 I won't cut very well at all. For example I did 114 stickers roughly 2" x 3" with a nice white...
Okay so I am new to Roland and always been a Mimaki user but am finding it difficult to get the Versacamm 540 I to cut correctly. I've read up a lot on the cut calibration and though I haven't done it yet is because my machine will cut just fine if I only do a line or 2 of items. Today I went...
Have slight banding on blackish colors and the nozzles are good wondering how I would do a feed calibration...Sounds dumb but I'm a Mimaki guy and just put the roland in only 3 days ago. Any help would be great
Needing to find versaworks ASAP like tonight or tommorow if possible because when I picked up my printer I took the versaworks box but when I got to shop after 6 hr drive it was a non working bootleg...any help is greatly appreciates
Have looked at every thread and tried everything but I can't get my VP 540-i to connect to my computer. I bought an Ethernet cable because I was told if I send it to a router it didn't need to be crossover. Is this correct? Any ideas would greatly help. Also again I know it has been covered...
We are going to be moving a Roland 540i from Lousville Kentucky to NW Ohio on a 6 hr trip. Wondering best way to move it. It will be inside an extended cargo van and strapped down well along with the head locked in of course. My question is do I need to flush all the inks from line or...
Hey guys I am looking to get rid of my Mimaki SP130 II and upgrade it with someting a little faster. I am on a budget of 10k and it is limited which sucks but ow well, so if I can't find anything I guess I will just keep my equipment I now have. I wanted to know what you think of the versacamm...
Wondering if anyone here knows where or if it is possible to purchase additional wheels for my cutter? I am noticing even at setting it half speed when I do a lot of contour cut decals it will of track alittle. I normally only do 4-7' at a time but not only does it make it tuff because we do...
Wondering if anyone knows which font this is? I have a customer who brough in a bunch of 6' long signs and needs lettering on them in black but must match font. Any help is appreciated
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.