• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Surecolor f170 printing greys, brown

    When I print on the paper it’s coming out a tan/brown color. The pictures above are just an example of what the print changed to after I switched the paper around to the correct side. It’s something I have messed up in the print settings I'm assuming. Just can’t pinpoint it down.
  2. Surecolor f170 printing greys, brown

    They were coming out fine when I was printing on the wrong side of the paper. Once I realized I was printing on the wrong side of paper they turned brown/tan. Quality as far as other colors and more sharp lines improved drastically.
  3. Surecolor f170 printing greys, brown

    I bought a Surecolor f170 a few months ago just so I could offer koozies to my race car customers. I’ll start by saying I found out I was printing on the wrong side of the transfer paper and the quality of the prints were kind of blurry but colors were always pretty close. Once I figured out...
  4. In the market for cheaper laminator.

    Thanks for all the input. It helped send me in some directions to keep looking. I wish toolots.com had some in stock and I would go that route, seems like the safest out of all my current options but thanks to "covid" like everything else they are out stock currently.
  5. In the market for cheaper laminator.

    I’ve had a Master Worf Series laminator for about the last 10 years and it’s been good to me for only running about $1600 at the time I bought it. That being said the outer edges of the rollers seem to have expanded and are pulling 60” material through the machine at a quicker pace over the...
  6. Dirt Race Cars

    Just looking for something that will have a better adhesion, seems like I can lay a car and in the smallest spots it will lift overnight. The picture is a bit of an over kill on the material lifting as its been hanging on the shop wall for a few years but just trying to show the the angle that...
  7. Laminate feeding off

    I have a cheaper laminator that has always worked just fine for me. Used to be able to load a roll and run the whole 150' with no issues. Lately its been seeming to pull the outside of the vinyl and bunching up and having an excess in the center of the vinyl. I run 60" material through it...
  8. Western Font

    Been searching for this font for the last couple days and haven't had any luck. Ring a bell to anyone?
  9. Dirt Race Cars

    I'm just curious what materials other companies are using to do dirt race car wraps. I have been using Arlon DPF 4500MLX for the last few years and just looking to possibly change it up to find something that might last a little longer and conform better during insulation while still keeping the...
  10. Been searching, but no luck.

    Been looking for this font, but I'm not having any luck finding it. Thoughts?
  11. 2014 chevy silverado headlight grill decals

    Have a guy with a pulling truck that wants me to print the grill and headlight kit of a 2014 Silverado. Been searching the internet for print files that I can purchase, but haven't had any luck. Anyone know of a place I can purchase these files or is this something I'll need to take pictures of...
  12. Squirrel cartoon art

    Looking for a cartoon squirrel that looks kind of like a pilot. Have attached an image I found to give you an idea of what I am looking for. Anyone know where I can find something like this? I have searched high and low and through all my clip art books and can't find anything like the picture I...
  13. Dreaded network issues

    I ended up replacing the mainboard. Bought a refurbished one from Kent over at Mac Media! Have nothing but good things to say about him and the company. Had the board overnighted and just got it installed. Had a little hiccup at first and didn't think the board was going to work but we got it...
  14. Dreaded network issues

    I can cut with no problem. It's only when I try and print that it disconnects and stop mid job. From what i've read on here from other people having the same issue it looks like I'm going to have to bite the bullet and spend the 2k for a new main board.. Anyone else have any other options...
  15. Dreaded network issues

    I rewired my internet router so I was able to run ethernet cable to the printer. I have the computer also hard wired now to the router. I can connect to the printer but the printer will only print a few inches and then stop and just say processing on the printer. Versaworks then says the...
  16. Dreaded network issues

    I am completely lost now. I can connect to the printer, start a print, prints about 2-3 inches then just stops. Versaworks status changes to not connected. The printer then says now processing. Once this all happens I have to restart versaworks, power down the printer once it all powers back up...
  17. Just stops printing and states Not Connected in VersaWorks

    Started having the same issues today, anyone else have any fixes for this besides starting to replace boards?
  18. Dreaded network issues

    Once the printer stops and disconnects from the RIP program it wont connect again using the same IP. I can go into the printer and change the IP one digit up and then go into versaworks and change to the same digit and it will connect back to the printer but just repeats itself and stops mid...
  19. Dreaded network issues

    OK ran windows network fix. I'm now connected to wireless router via cable. Printer connected to Versaworks again. I started a test print, was printing and the printer lost connection with the RIP program again and print stopped mid print. Any clues?
  20. Dreaded network issues

    I ended up moving routers. I opened up Versaworks was able to enter the IP info for the printer. It connected but while I was getting ready to do a test print the printer disconnected. I have the printer connected to the wireless router and the laptop is connect to the wireless router using the...
Top