Search results

We have trial of Onyx Thrive and so far so good. As of right know we are getting good color with generic profiles. However, we are trying to write some profiles and are having a problem with our ink limit. We print and read our ink restriction and calibration and everything seems fine, but as...

Holy crap I completely forgot about this thread. I have been so busy with jobs that didn't need color correction or have used our other printer with is dedicated RIP software. So back at it with color mapping. Still having troubles. don't know what to do and SAi is not be very helpful and there...

Hi Bannertime, Something sticks around. When I print just using the stock PMS colors without mapping they are around 4.5 - 7 dE away from the actual color. I repeat the swatch process until I get within 1 dE which is about 3-4 times. Then when I print the actual file with the PMS colors, the...

I am new to Flexi 19 and have started to try the color mapping feature. I’m using a Roland LEJ 640FT and its fairly easy to print the swatches on Sintra and match PMS color with a Color Muse. I get with in .5 - 1 dE. I save this all as a preset. But then when I try to print a file with the color...

We use Dreamscape and Korographics. We get them from Laird Plastics. I think they only come in 54” width, so you may need to cut them down.

Looking for a long term opaque white printable vinyl with great tack, minimal shrinkage, and clear adhesive for some logos that will be on glass doors.

We have a Roland LEJ 640ft and the varnish is by far easier to maintain then the white. Also we never flood coat with the varnish, we use ClearShield production clear for that. The varnish is used for embossing and spot gloss. Since gloss varnish is cured slower than the CMYK it does have the...

I have to agree it looks like contamination of the vinyl. I have had the same issue with 3M SV480 and it looked just like that.

Is the PNC-1200 and PNC-1210 take the same strip? If so Pacific Coast sign Supply says they carry them on their website. Roland Cut Strips - Pacific Coast Sign Supply There is also this site that shows the PNC-1210. 8th row down from the top Protection Strip for Roland Printers & Plotters...

Thanks for the info bud, it helps.

We build wall murals for clients all the time. Below are just some of the stock image sites we use. Shutterstock Istock Adobe Stock Big Stock Dreamstime Aurora Graphics Pexels - Free

I do have the quoting only version of EstiMate which is $39/month. One of my friends has actually been using the quoting only version for a couple of months now and has had no problems and can make as many quotes as he wants. I also cannot get into "manage your plan" part either, I click on it...

We installed a new quoting software called EstiMates. It is a great software when it works, but when I get around 3-4 quotes and then it will not make any more.If any one has used this software and knows a solution to my problem that would be awesome. EstiMates customer service is really slow...

Awesome! Thanks

There are some areas that either have no cmyk or very little, such as the clouds in the sky or light skin tones.

We are using AP3155 adhesion promoter on some large 1/2" acrylic panels. I was wondering if we could do 2 passes (1st pass with cmyk, 2 pass flood print with white) or if I have to print cmyk and white in 1 pass? Does the adhesion promoter actually fully cure under the UV light on the first pass...

We have a Roland XR-640 and we have what looks like black cross contamination in the yellow. Its at the top, bottom and middle of the print because of how it stack the print when testing. I cleaned all the way around the print head thinking that would be the answer, but no. I am curious if it...

I want to thank everyone for their replies. SignMeUpGraphics & Martin Denton - We had several options on the table. Print white, back it with vinyl, and paint white. The graphic is going to be seen from the back side also because of its location. We were thinking that the vinyl would possibly...

We have a Roland LEJ-640ft and we are going to be doing some 48" x 65" prints on 1/2 acrylic second surface and we need to flood the back of the prints with white. Instead of flooding the print with white ink which will take up printer time and cost more in ink we were thinking of just painting...

Hi Sushanta We had a similar problem with our Roland XR-640. The print head had minor scratches on it from a head strike, but still worked then one day the Lk stopped working. When the techs came to fix it they said it might be a top cap, check if the top cap seal is clean, the rubber is in good...