Search results

Hi all, I just bought a newer Envision 375 (used but in better condition) and I tested the machine when I bought it and everything worked great. Everything still works good but the screw that tightens and holds the blade holder into place while cutting is very loose and when running long jobs...

Follow up, I ran a test print with the printer and it works. There is a dead pixel but that was suspected. So the printer does work, just having trouble working when I send an image from software to printer

What you said here I followed and to all worked. Everything works as it does on my Edge 2 (what I currently use). The issue I am running into is when I get this message screen, usually I am able to just go to the printer and tap through the online button on the printer. This new (to me) edge 1...

Should have given pictures and better details before, but I am using Omega 6.5. This is the printer and the two cords that came with it. I tried both cords and didn't get a print image. Do i need to "download" the comm. cords to the software or something?

Hey everyone, I recently just purchased a ton of Gerber Edge foils and was given a Gerber Edge 1 along with it. The seller claims it works but does have a dead pixel. I have turned it on and plugged my connection cable into it (the cable I use for my Edge 2) and it just doesn't have...

Still looking for a nice Gerber edge 2 (preferably), or Gerber edge 1! Located in Nebraska/Colorado. DM if you have any equipment close you are looking to sell. God Bless, Will

Hey everyone, I am looking to get some dry erase 15" vinyl or approx. 13.5" overlam to use with my gerber edge 2. The issue is, I don't even know if anything like that exists. Can anyone tell me if there is a product that I am looking for out there and available? Thanks, Will

Hey all, I got a question which will target mostly people who have had a pixel blown in their Gerber printer, or anyone who has knowledge on the subject. I was just wondering, when a pixel is blown, is there anything you noticed about the printer that you had it doing? (Example: Printing for...

That would be much appreciated! Thank you!

I am currently having a tiny bit of trouble with my Envision 375 cutting perfectly round circles (see pictures attached), every circle that is cut seems to be more elliptical than circular. I have replaced the cutting strip but have not oiled the machine. My question to you all, would oiling...

That was my thought. I planned on being my own laptop with the software already installed on it and test the equipment there. That being said, if the equipment works and I buy it, do I need to get another omega software for it? Or can I use my same omega software for my current edge 2 and...

I assumed I could just plug and go, but I called GMS to make sure and they said some issues could arise. I feel like when I switch printers before I was able to use the same software, but that was 5 years ago so couldn’t really remember. Just thought some people on here would have a better idea...

Hey all, I am currently looking at purchasing another envision 375 and edge. The seller has all the power cords and everything for the equipment, just no software. My question to you all is, when I go out to look at the equipment I want to test it to make sure it is working properly, can I take...

Hey all, I have an Edge 2 and Envision 375 and do not have a yearly serviced plan with GMS. I am looking for another printer and plotter to expand my business (if anyone is selling or know someone who is selling please message me!), but I have yet to find new equipment so I started looking into...

Would make sense. I was printing in 600x300

Hi all, I am having some issues printing my silver medal 2. There seems to be striations when I print and I am unsure why (see pictures below). When it is printing the edge 2 which I print on seems to be almost "chugging/chopping" and then these striation marks is the output. This only happens...

Hey guys, quick question regarding Gerber Medal foil series. Is there a difference between regular silver medal and silver medal 2 foil? Sent from my iPhone using Tapatalk

It is laminated. And where that could be the problem, I have been laminating the same way for years with the same material. I’ll have to try without laminating and see if it is any better. I also think getting new blades will help with sharper cuts too Sent from my iPhone using Tapatalk

Hey everyone, I have been noticing with my envision 375 that when I cut circles, the cut comes out more as an ellipse share rather than circle. In the omega software I have the cut dimensions of the circle as 1.5” x 1.5” but as you can see from the picture, it isn’t a perfect circle. I have...

Hey guys, I am making a set of Mississippi State football helmet decals for a customer and the burgundy color I just purchased is not as dark as I would like and not dark enough to send out to him. (See pictures to see color difference between mine and the authentic decals). My question is, what...