Search results

Good Morning, Agriculture is my background and very proud of it. If you do not like the graphics supplied by the owner, get yourself out to the farm and take your own. You know what you are looking for, don't leave it for someone else to do. If I needed to do that for my customer, you...

I also am a one-person shop. Focus is embroidery, but also heat press vinyl and digital printing. 4 years ago, I moved 150 miles from NY to PA. Both were small towns. Yes, I have had to start all over getting new customers and several old customers still have me decorate items and I...

jambobird, I finally figured it out. It is "FEED" I asked a tech and here is the answer: The "View Feed" in the machine setup is only as an on off option. Laura - aka - Aunt LuLu

Good Morning, They look like Roses to me. Laura

No, I just deal with it. I put it down to the vinyl process (any vinyl process) has waste. Laura

Good Morning, I tried exporting the file as a TIFF, it opened perfectly in Rasterlink6. There is no "Cut Line" file. Is there a step I am missing? Laura

Good Morning/Afternoon, I use Corel Draw X7 for creating artwork, that I send to a Mimaki CJV150-75 for printing & Cutting. When I was trained on the printer, I was instructed to "export" to EPS or PDF for printing/cutter as per the trainer (Dec 2019). This has worked well - so I...

I switched to CORE a few years ago, glad I did. https://embhq.com/ Laura - Aunt LuLu

Took a break for about 1 1/2 hours, turned off machine, shut down computer. When I stated again, the same issue. I deleted the file from Raster Link6 and opened it. It worked fine. I circled in red the problem. This value was put in by Raster Link6 and I removed it from the job that...

Hi folks, Started off to a great start this morning. Began with printing some stickers with my mimaki printer using raster link 6. Then I switched media to printable heat press vinyl. Only slightly different widths, and yes, I measured the width of each run before anything with raster...

Thank you to everyone. All of your info helped. What is did was lower the temps on all 3 heaters and move the pinch rollers for a more even space. Then reprinted what I needed to do. I did not want to damage the new print head as it is new (3 1/2 years old). There is so much more...

Afternoon Folks! Just replaced the head,& dampers on my Mimaki CJv150-75, went to complete an order today, and received a head strike. Not what I wanted. Attached is a picture of the vinyl in the machine. It was caused by the vinyl bubbling up under the pinch roller #2. My...

I have had that. My thinking on it - file began as SVG, in Affinity Designer I placed a graphic into the design (it was actually a shape of a dragon fly). Copied and made several shapes. Resized all to what I wanted. Exported as an EPS or PDF (not sure what I used) When I opened...

Morning Folks! Want to thank everyone who chimed in with help. Hubby and I replaced the dampers, but the end result / fix was getting a tech in. The machine needed a new head- it delaminated, new cap top and the tech did some flushing on the yellow line, black ink was in it. We could see...

Thank you, I will admit, I can do better at maintenance. Must make a rule "NO MORE EXCUSES" for me not to do that. Humidity in my shop - probably on the low side this time of year. Located in northeastern PA not really spring, so we still need heat from the furnace. Also just changed 3...

Great question! I am not, I have been using Mimaki profiles. The one for Matte finish. I will go and look for Chemica profiles.... Since I posted this, I did download and install profile for the media I am using. Just checked the head height and it is on low. Picture attached was with...

Thank you for getting back to me so quickly. I walked away from the machine for a few hours and came back pulled out the manual and did nozzle washes, test prints, cleanings a couple of times. the 2 pictures below are the test prints, the circles on the light blue are where the black ink is...

Good Morning~Afternoon, Attached you will find a picture of my tiny letters that printed blurry. The letters are tiny, the state of TEXAS lettering is 0.451(W) X 0.091 (H) -measurements in inches. Font Arial Black, Corel Draw 2017 version and Raster Link6. Printing with Mimaki...

Maid of the mist boat ride. As you board the boat, you are given a rain poncho. You go as far to the falls as you can. When hubby and I went the water spray was extreme - so extreme I had to take off my glasses. Love it. There is also "cave of the winds" Stay after dark and see the...

Looks similar to fonts from Laura Worthington. I have purchased some of her fonts and they work great.