• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Setting the Print Profile white HP LATEX 800w

    Hi I have a Latex 800w machine, I need a suitable profile for printing SATTLER textiles so that the white is as intense as possible well thank you
  3.

    News Roland EJ-640 (fallen out blue ?)

    Hi we have a problem with the roland on the head And it turned out to be blue, the service was here with a knife in the back, he changed the dumper and cleaned what needed to be done and now it's gone again.

  4. Mistral M1650 cylinder

    Hi, I need spare parts for the Mistral M1650 S:N K1351D0218 machine. It is a rubber bottom cylinder. well thank you
  5.

    Rolnad EJ-640 Head

    New news, I cleaned my head with a cleaner and the test is ok but half the head falls out again when pressed What could be wrong ?

  6. DGi VE-3204D

    Hi I need service for a DIGI printer ( DGi VE-3204D ) in Europe and and ink for the machine ? well thank you
  7.

    Rolnad EJ-640 Head

    Why doesn't he push half his head, can't a woman be a damper?
  8.

    Rolnad EJ-640 Head

    I don't think anything fell because the day before the machine was printing everything was fine. On the morning of the second day, during the first test, the nozzle on the B head did not work, and even Power full did not help.
  9.

    Rolnad EJ-640 Head

    He doesn't know what the head could have hit, then it would be visible on the other side as well. I think it's from the pressure damer , because that's why there are such dents
  10.

    Rolnad EJ-640 Head

    ImagePerfect™ 2553 Plus ImagePerfect™ 2125 Frontlit Banner
  11.

    Rolnad EJ-640 Head

    Hi both heads were changed on Roland. One in January and the other in March. Now half head B is not printing at all. The service does not want to accept the claim that the heads only have a 6-month warranty. Is it possible for the head to go bad in such a short period of time?

  12. DGI VE-3204D Service Manual

    Hello, I need a manual or a service for the DIGI VE-3204D in Europe. Thank you
  13.

    Jetrix service contacts

    Whose phone number is this?
  14.

    Jetrix service contacts

    I sent an e-mail but I have no answer, they do not communicate at all I do not know anywhere to find any parts and especially uv led lamp
  15.

    Jetrix service contacts

    I have a damaged uv led lamp I need to get a new one. UV LED Lamp Head Unit ( SUF-138L-1502F-0-2
  16.

    Jetrix service contacts

    Hi please some contacts who can repair Jetrix printer. well thank you

  17. Need Help Arizona Flatbed Roll Media- Cannot get wallpaper to lay flat= Head scrapes

    Does the material curl during rewinding? maybe it's from the heat to put the lamp on a lower stage
  18.

    350GT Canon Arizona - Z Axis Error / Looking for a Tech

    1. First you need to see if the motorcycles are going 2. Maybe the crossed head can be easily adjusted with the screws in the photo 3. Defective shaft housing

  19. poor quality oce arizona

    The ribbons are made immediately from the beginning of the print, and if so, the print head may need to be calibrated. If it does so further, it is possible that the chips will fall out as the filters are not aerated?
  20.

    Led lamp replacement Jetrix LX3

    Hi it is possible to repair the led lamp for the Jetrix LX3, or recommend a replacement for another type ?
Top