Search results

If you actually go into the settings, there is no OPOS XY setting, the only option in Summa is OPOS X

We followed this exact video, the barcode isnt printing!

It looks like I was able to get a barcode to print via Summa, and OPOS X option, but I dont understand why it wont print through the OPOS option, the directions are specifically for "Summa S2TC OPOS CAM Cutters"

Hello, I am trying an ONYX Thrive Trial, *which completely bricked my access to Onyx Gamaprint btw* and I am trying to set up my Barcode workflow to Utilize XY2. Backstory, I am going through options on trying to fix an accuracy problem, and my next path is trying to utilize the XY2 workflow...

I ended up finding this while searching the web. Unfortunately for me I print with ONYX Gama Print which is extremely limited. I was told I need ONYX Thrive I would have access to the OPOS XY2 or OPOS Xtra options. This can be confirmed in this video showing the workflow. Manual where I found...

I have a total of 8 rollers, seems like overkill but when we first started we could not for the life of us get accurate cuts on Reflective media because it kept buckling. Adding all the rollers fixed the buckling issue forsure.

Wow, after reading this I now find out I'm not the only one with a Summa cutter with it randomly not reading marks and stopping/cancelling half way through jobs

Would it still be a lamination issue even if we're cutting at the slowest speed possible? It almost looks like a software issue.

I was told that Calibrating feed length doesnt apply since our entire workflow is barcode based.

I also use Substance vinyl! I love this brand, but I'd hate to find out the problem is coming from the vinyl itself. We are also using 30" vinyl, at this point we're cutting at a snails pace which doesnt really bother us as much since we send rolls to cut and night and they're done in the...

So we ended up reducing Up Velocity, Up Acceleration, and Down Acceleration to the second slowest speed, and we're now cutting 4ips which is the 3rd slowest speed available and we're still seeing the same drop in accuracy at the last 2-3 rows but it's about .25mm. If I speed it up, that .5-1mm...

Does anyone have a problem with the cutter being 1mm off center vertically near the end of a cut job? For the first 3 rows it cuts perfectly center, but at the last 3-5 rows or so its always. Off. I have ran almost 20 Opos Calibrations in one go, but still have this issue and the end of the...

we are printing on Onyx Gama Print! From their cut server it creates a cut file and sends it to a hot folder where Cutting Control retrieves the file. There is a section to switch it between the OPOS modes, but there is no Force OPOS XY option.

Calling all Summa users. Anyone know why the Alignment Mode keeps resetting while we're cutting in Cutter Control? We set it to Force Opos XY and when we're roll cutting we usually find it switching to Opos XY mid roll and it throws the alignment off by a millimeter. I get that they should...

We're printing on a Monomeric Holographic Vinyl that we imported. I see people get great results laminating with a flat bed or manually laminating, but we print thousands of stickers so our only efficient option would be roll to roll laminating, and occasional sheet feed when we reprint...

We have switched to Oragaurd 215, PL-3150, We are seeing good results! Still some horizontal curling opposite of the lamination feed itself, but I'm thinking that is a vinyl shrink issue. Cold lamination, 1 inch hand tighten after pinch rollers touch. Max vinyl tension, zero lamination tension.

Believe it or not, when we first got into ecosolvent signage/sticker printing we were told Oragaurd 210 was the go to quality material to for all printing needs so we stuck with it and dealt with the aforementioned problems thinking it was our machines for a good 2 years.. WOW. We have Oragaurd...

Has anyone experienced problems with the vinyl curling upwards as soon as you laminate the vinyl? This happens with both of my GFP Laminators. We tried: Loosening the tension to as low as possible and even tightened the pinch rollers 4 inches after they touch. Loosened the pinch roller 1...

Have you guys experienced problems with the vinyl curling up as soon as you laminate the vinyl? This happens with both of my GFP Laminators. I even loosened the tension to as low as possible and even tightened the rollers 4 inches after they touch/loosened the roller 1 inch up after they touch...