hp latex 300 series

Hi Guys, Hope you can help or offer some advice please A couple of times today, and once during the week, we had the print almost swerve off its path Our prints have an equal gutter on each side of the print The roll remains straight, it is not unwound uneven, but for some reason the print...

I've had my HP Latex 310 printer for about 6-7 years now. The brown belt just snapped during a job. I was able to find the part online. Has anyone ever changed out the belt on their own? Do I need to contact HP service to perform the service? What's the cost for an HP tech these days?

I have an HP Latex 360 and have recently been having printheads consistently fail on me. It's never the same consistent print head though. Sometimes its Magenta/Yellow, sometimes if LC/LM, and sometimes its Black/Cyan. I haven't detected any kind of pattern other than it always shows itself...

After upgrading to latest firmware on latex 360 the jobs show as numbers and not with their names as used to in printos app. For example instead of job name it shows 13392. This number increases by one number after printing next job, so probably is some internal number of the printer. For...

I'm running HP Latex 360 and I'm printing decals and stickers. Typically they're small stickers about 4" x 5". I print on two types of vinyl. Orajet 3651M and Ritrama high tack intermediate vinyl. When I use their official ICC profile I downloaded from their website I notice graininess and...

I use an HP L360 and Graphtec Fc8600 using Onyx 18. My question is regarding how to set up for print and cut on the Graphtec? How do I position the pinch rollers, where do I move the blade to? Do I press "set origin"? I'm asking these questions because when I send to cut the first 2 or 3...

Hi Does anyone know how to make your own profile for an HP latex 365? I don't mean how you actually make them on the printer but how you decide how many passes, temperature, etc you will need? We have so much problem with the downloaded ones so now I am fed up and will make my own profiles.

Hi I have a question about when you replace the ink on a HP Latex 365? My designer says that it can be replaced at 20% but I think that too low. Any recommendations?

It's so odd. I pass everything in the connectivity test, except verifying the time/date. Any suggestions why? FYI, I do have a VERY old firmware. Not sure if this is an issue. Don't ask me to update the firmware. I can't jump from a very old firmware to the most current. Anyway here is...

Hi guys! Good day! Just wanna ask some suggestions/advises. I've been having trouble printing grey on my HP Latex 365. For some reason all of a sudden, it's printing too much magenta on it and turns out pinkish. Only having trouble with grey though. I've tried all the print tests and...

I am running a HP Latex 300 printer and using 3M IJ35C media. I have run a few jobs now with a full solid - black, red or dark green. I have noticed that there are marks on the prints after it dries. I cannot tell what it is and what's causing it. I am hoping someone has encountered this before...

I am connected to the internet. I have tried updating the firmware manually and through the printers screen. I just can't seem to update my HP Latex 360 to the latest firmware update which is NEXUS_01_14_00.5 I have version NEXUS_00_06_02.10 installed currently. Do you think it is because I...